A comparison study of the two-bladed partial pitch turbine during normal operation and an extreme gust conditions

نویسنده

  • T Kim
چکیده

This paper shows the load comparisons between the numerical simulation and the full-scale load measurement data. First part of this paper includes the comparisons of statistic load in terms of maximum, mean, and minimum values for the selected normal operation cases. The blade root bending moments and tower top bending moments are compared. Second part of this paper introduces the dynamic response comparisons during an extreme wind gust condition where the wind speed changed approximately 10m/s during three seconds. The rotor speed and blade root flapwise and edgewise bending moment are compared. The nonlinear aeroelastic simulation code HAWC2 is used for the simulations. A very fine agreement between the simulated and the full-scale measured loads is seen for the both comparisons.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Reduction of teeter angle excursions for a two-bladed downwind rotor using cyclic pitch control

During the design of a two-bladed turbine a very important load reducing feature is the teeter mechanism. This mechanism enables a free rigid body motion of the blades relative to the hub in such a way that bending moments between rotor and hub are removed around the teeter axis. Due to the practical issues such as the clearance between blade tip and tower, the teeter angles must be limited as ...

متن کامل

Specific gust shapes leading to extreme response of pitch- regulated wind turbines

Via so-called constrained stochastic simulation gusts can be generated which satisfy some specified constraint. Constrained stochastic simulation is based on conditional densities of normal random variables and it has previously been applied to generate maximum amplitude gusts and velocity jumps. In this paper it is used in order to generate specific wind gusts which will lead to local maxima i...

متن کامل

Application of guide blades for improving performance of savonius wind turbine

Application of guide blades is an appropriate method for improving aerodynamic performance of savonius wind turbine. Guide blades gather the wind energy around the turbine and guide them into the concave side of savonius rotor. In this paper, numerical investigation is conducted for evaluating effect of the guide blades on the performance of savonius turbine. Aerodynamic performance of the turb...

متن کامل

Experimental wind tunnel testing of linear individual pitch control for two-bladed wind turbines

In this paper Linear Individual Pitch Control (LIPC) is applied to an experimental small-scale two-bladed wind turbine. LIPC is a recently introduced Individual Pitch Control (IPC) strategy specifically intended for two-bladed wind turbines. The LIPC approach is based on a linear coordinate transformation, with the special property that only two control loops are required to potentially reduce ...

متن کامل

Different Types of Pitch Angle Control Strategies Used in Wind Turbine System Applications

The most common controller in wind turbine is the blade pitch angle control in order to get the desired power. Controlling the pitch angle in wind turbines has a direct impact on the dynamic performance of the machine and fluct­uat­io­ns in the power systems. Due to constant changes in wind speed, the wind turbines are of nonlinear and multivariate system. The design of a controller that can ad...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017