High output impedance current-mode multifunction filter using FTFNs
نویسندگان
چکیده
A new current-mode (CM) single input three outputs (SITO) multifunction filter topology is presented, which employs only three FTFNs or OFAs and five passive elements. From this topology, two filter circuits can be derived selecting the passive elements properly. The proposed filter realizes three filter functions simultaneously all at high impedance outputs. No component matching is required and all the passive sensitivities are low.
منابع مشابه
Current-Mode High Output Impedance Multifunction Filters Employing Minimum Number of FTFNs
In this study, five current-mode FTFN-based multifunction filters are proposed, which realize the same transfer functions in ideal case. All circuits employ two capacitors and three resistors. For each circuit R-C:C-R transformation increases the number of realization possibilities to ten. The proposed topologies simultaneously realize three basic filtering functions using minimum number of FTF...
متن کاملA New Current-mode Multifunction Filter with High Impedance Outputs Using Minimum Number of Passive Elements
A new current-mode multifunction filter using minimum number of passive elements is proposed. The proposed filter has single-input and four high-impedance outputs. It uses four passive elements (two capacitors and two resistors) and four dual output second generation current conveyors. Each output provides a different filter response, namely, low-pass, high-pass, band-pass and band-reject. The ...
متن کاملVoltage-mode Sito Multifunction Filter Using Only Two Ftfns
In this paper we present a new voltage-mode (VM) multifunction filter configuration using only two four terminal floating nullors (FTFNs) and five passive elements. The circuit with a single input and three outputs can simultaneously realise lowpass (LP), bandpass (BP) and highpass (HP) filter responses. The natural frequency ( 0 ω ) and the bandwidth ( /Q ω0 ) can be orthogonally controlled. T...
متن کاملHigh-Input Impedance Voltage-Mode Multifunction Filter Using a Single DDCCTA and Grounded Passive Elements
In this paper, a novel single-input three-output (SITO) second-order multifunction active voltage filter with high-input impedance is proposed. The proposed circuit is based on using the recently reported active building block, namely differential difference current conveyor transconductance amplifier (DDCCTA). It employs one DDCCTA as active element together with one grounded resistor and two ...
متن کاملA Novel Multifunction CFOA-Based Inverse Filter
We present a novel multifunction inverse biquad configuration based on current feedback operational amplifiers (CFOAs) and grounded passive elements. The proposed scheme can be used to realize inverse lowpass, inverse bandpass and inverse highpass filter functions. The relevant coefficients of the inverse filters are orthogonal adjustable by independent passive elements. All the passive element...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1999