Sintering and yttrium grain boundary segregation in sub-micron grain size alumina

نویسندگان

  • E. Sato
  • C. Carry
چکیده

Sintering behavior with and without external stress was investigated using undoped and doped (1500 ppm yttria) sub-micron a-alumina powders. The yttria doped alumina showed anomalous behavior with grain size around 0.9 pm, a second peak in densification rate during free sintering and a stagnation followed by a steep increase in flow stress during sinter forging. These were thought to correspond to the creep rate plateau regime and to the saturation of grain boundary with yttrium. Yttrium segregation retarded the densification during free sintering, and made the flow stress higher during sinter forging. It also lowered the grain size at which the transition occurred in the rate controlling mechanism of deformation from grain boundary diffusion to interface reaction.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Grain boundary strengthening in alumina by rare earth impurities.

Impurity doping often alters or improves the properties of materials. In alumina, grain boundaries play a key role in deformation mechanisms, particularly in the phenomenon of grain boundary sliding during creep at high temperatures. We elucidated the atomic-scale structure in alumina grain boundaries and its relationship to the suppression of creep upon doping with yttrium by using atomic reso...

متن کامل

Atomically ordered solute segregation behaviour in an oxide grain boundary

Grain boundary segregation is a critical issue in materials science because it determines the properties of individual grain boundaries and thus governs the macroscopic properties of materials. Recent progress in electron microscopy has greatly improved our understanding of grain boundary segregation phenomena down to atomistic dimensions, but solute segregation is still extremely challenging t...

متن کامل

Comparison of Creep Behavior in Alumina Based Ceramics Densified by Spark Plasma Sintering and Hot Pressing

Spark plasma sintering (SPS) method, as plasma activated sintering, is a method applicable for rapid sintering of metals and ceramics. Owing to the advantage of rapid heating, the alumina ceramics obtained by SPS have a grain size and density comparable to those of hot pressed ones. The increase of densification rate may be related to some difference in ion transport characteristics. This study...

متن کامل

Comment on ‘‘Effect of Interface Structure on the Microstructural Evolution of Ceramics’’

THE following comments are directed to the sections (2) ‘‘revisit to the grain growth problems in alumina’’ and (3) grain growth without a liquid phase in the article of concern. The purpose of this comment is to challenge the authors’ assertions and refute the following arguments, namely, first that ‘‘MgO can be considered a very effective grain growth promoter in the sintering of alumina,’’ s...

متن کامل

Mechanism for the development of anisotropic grain boundary character distributions during normal grain growth

Grain boundaries in polycrystalline magnesia-doped alumina and yttrium aluminum garnet were classified as growing in area or shrinking in area on the basis of topology and curvature considerations. Measurements of dihedral angles at grain boundary thermal grooves were used to determine that the energies of the growing boundaries are, on average, lower than the energies of the shrinking boundari...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017