Evaluation of Practical Process Aspects for Lipozyme TL IM Catalyzed Bulk Fat Modification in a Batch Reactor
نویسنده
چکیده
A few issues to apply Lipozyme TL IM-catalyzed interesterification for bulk fat modification were investigated in a batch reactor system with concerning practical process development. The hydrolyzed products, i.e. free fatty acids and diglycerides, generated from the Lipozyme TL IM-catalyzed interesterification process due to water participation, can be minimized by enzyme pre-treatment. For the interesterified products, free fatty acids formed by hydrolysis had softening effect on solid fat content and diglycerides retarded crystal transformation during storage. Reaction time was more critical for the reduction of acyl migration than the control of water content in the system. The temperature effect on the rate of interesterification in terms of Q10 value was determined as 1.3, meaning that the increase of reaction rate was limited by the increase of temperature. Therefore, for practical implementations, a temperature of 60-70 °C which the feed stock can be totally melted for the reaction should be used in consideration of enzyme stability. The quality of feedstock was confirmed to be critical to maintain the enzyme activity and the refined, bleached, and deodorized oil should be used as the feedstock.
منابع مشابه
Lipase Catalyzed Incorporation of Conjugated Linoleic Acid by Transesterification into Sunflower Oil Applying Immobilized Lipase (Lipozyme Thermomyces lanuginosus and Rhizomucor mehei)
Conjugated Linoleic Acid (CLA), Glycerol (G) and sunflower oil blends with varying concentration were subjected to enzymatic esterification using a 1, 3- specific immobilized lipase. CLA was used as acyl due to its purported health benefits. The transesterified lipids were evaluated for free fatty acids (FFA) and composition of fatty acids by gas chromatography. Lipozyme RM IM is preferred for ...
متن کاملOptimization and kinetic study on the synthesis of palm oil ester using Lipozyme TL IM
Enzymatic synthesis of palm oil esters (POE) was carried out via alcoholysis of palm oil (PO) and oleyl alcohol (OA) catalyzed by Lipozyme TL IM. The optimum reaction conditions were: temperature: 60 °C; enzyme load: 24.7 wt%; substrate ratio: 1:3 (PO/OA), impeller speed: 275 rpm and reaction time: 3 h. At the optimum condition, the conversion of POE was 79.54%. Reusability study showed that Li...
متن کاملScale-up synthesis of lipase-catalyzed palm esters in stirred-tank reactor.
Lipase-catalyzed production of palm esters by alcoholysis of palm oil with oleyl alcohol in n-hexane was performed in 2L stirred-tank reactor (STR). Investigation on the performance of reactor operation was carried out in batch mode STR with single impeller mounted on the centrally located shaft. Rushton turbine (RT) impellers provide the highest reaction yield (95.8%) at lower agitation speed ...
متن کاملKinetic study of lipase-catalyzed glycerolysis of palm olein using Lipozyme TLIM in solvent-free system
Diacylglycerol (DAG) and monoacylglycerol (MAG) are two natural occurring minor components found in most edible fats and oils. These compounds have gained increasing market demand owing to their unique physicochemical properties. Enzymatic glycerolysis in solvent-free system might be a promising approach in producing DAG and MAG-enriched oil. Understanding on glycerolysis mechanism is therefore...
متن کاملModeling of esterification in a batch reactor coupled with pervaporation for production of ethyl acetate catalyzed by ion- exchange resins
In the chemical industry, process intensification is needed to meet important goals such as sustainable and eco-friendly processes. For esterification reaction the “produce more with less pollution” objective can be achieved by coupling reaction and separation in a so called integrated process. In this work a model for describing the esterification reaction of ethyl acetate in pervaporation mem...
متن کامل