Design of a Force-Free Inductive Storage Coil
نویسنده
چکیده
Force-free coils have been considered for various applications as energy storage devices. A novel energy storage system consisting of both toroidal and poloidal coils has been developed. In this system, the Lorentz forces on the two coils are in opposition and can be made to cancel by having the proper ratio of ampere-turns in the two coils. A general discussion of force-free coil design is given,and the toroidal-poloidal coil system is described. The materials costs of magnets constructed with this and other geometries are compared. The conclusions are that conductor cost of this system lies between those of solenoids and toroids, and that the costs of structural material may be considerably less than either of these simpler coils.
منابع مشابه
A New System of Contactless Power Transfer with Low Voltage Stress and Parasitic Capacitors Effect
In this paper, a high frequency contactless power transfer (CPT) system is designed with ∅2 inverter drive. This system works in 30MHz frequency and 380W power with low voltage stress and considers the inductive link parasitic capacitor effect. In the design, we formulated the inverter equations first and then suggested another design for the transmitter and the receiver coils as the energy tra...
متن کاملPerformance Evaluation of Magnetorheological Damper Valve Configurations Using Finite Element Method
The main purpose of this paper is to study various configurations of a magnetorheological (MR) damper valve and to evaluate their performance indices typically dynamic range, valve ratio, inductive time constant and pressure drop. It is known that these performance indices (PI) of the damper depend upon the magnetic circuit design of the valve. Hence, nine valve configurations are considered fo...
متن کاملDesign, Modeling and Control of Magnetic Bearings for a Ring-Type Flywheel Energy Storage System
This study is concerned with the magnetic force models of magnetic bearing in a flywheel energy storage system (FESS). The magnetic bearing is of hybrid type, with axial passive magnetic bearing (PMB) and radial hybrid magnetic bearing (HMB). For the PMB, a pair of ring-type Halbach arrays of permanent magnets are arranged vertically to support the rotor weight. For the HMB, a set of ring-type ...
متن کاملCoil Design for High Misalignment Tolerant Inductive Power Transfer System for EV Charging
The inductive power transfer (IPT) system for electric vehicle (EV) charging has acquired more research interest in its different facets. However, the misalignment tolerance between the charging coil (installed in the ground) and pick-up coil (mounted on the car chassis), has been a challenge and fundamental interest in the future market of EVs. This paper proposes a new coil design QDQ (Quad D...
متن کاملCompensation topology for flat spiral coil inductive power transfer systems
Inductive power transfer technology is now widely used to provide power into various devices, such as battery based vehicles, implant devices, portable equipment etc. Despite the rapid development of power electronics components, inductive power transfer technology still has some drawbacks. The output power is vulnerable to the magnetic coupling efficiency of two coils. If misalignment and disp...
متن کامل