Sub-15 nm beam confinement by two crossed x-ray waveguides.
نویسندگان
چکیده
We have combined two high transmission planar x-ray waveguides glued onto each other in a crossed geometry to form an effective quasi-point source. From measurements of the far-field diffraction pattern, the phase and amplitude of the near-field distribution is retrieved using the error-reduction algorithm. In agreement with finite difference field simulations (forward calculation), the reconstructed exit wave intensity distribution (inverse calculation) exhibits a full width at half maximum (FWHM) below 15 nm in both dimensions. Finally, holographic imaging is successfully demonstrated for the crossed waveguide device by translation of a lithographic test structure through the waveguide beam.
منابع مشابه
Sub-10 nm beam confinement by X-ray waveguides: design, fabrication and characterization of optical properties
The propagation of hard X-ray synchrotron beams in waveguides with guiding layer diameters in the 9-35 nm thickness range has been studied. The planar waveguide structures consist of an optimized two-component cladding. The presented fabrication method is suitable for short and leak-proof waveguide slices with lengths (along the optical axis) in the sub-500 µm range, adapted for optimized trans...
متن کاملAlGaN/AlN integrated photonics platform for the ultraviolet and visible spectral range.
We analyze a photonic integrated circuit (PIC) platform comprised of a crystalline AlxGa1-xN optical guiding layer on an AlN substrate for the ultraviolet to visible (UV-vis) wavelength range. An Al composition of x~0.65 provides a refractive index difference of ~0.1 between AlxGa1-xN and AlN, and a small lattice mismatch (< 1%) that minimizes crystal...
متن کاملSub-micron grating fabrication on hafnium oxide thin-film waveguides with focused ion-beam milling.
Uniform period sub-micron gratings have been fabricated using focused ion beam milling on hafnium oxide waveguides. Atomic force microscopy indicates that the gratings have smooth and uniform profiles. At the period of 330 nm, the largest peak-to-peak height that was achieved was 85 nm. Scattering at the grating imperfections was found to be at least two orders of magnitude weaker than the inte...
متن کاملUltracompact and fabrication-tolerant integrated polarization splitter.
Design and fabrication of a 2×2 two-mode interference (TMI) coupler based on-chip polarization splitter is presented. By changing the angle between the access waveguides, one can tune the effective TMI length for the mode with less optical confinement (transverse magnetic, TM) to coincide with the target TMI length for a desired transmission of the mode with higher optical confinement (transver...
متن کاملDesign and fabrication of indium phosphide air-bridge waveguides with MEMS functionality
We present the design and fabrication of a dual air-bridge waveguide structure integrated with MEMS functionality. The structure is designed to function as a tunable optical buffer for telecommunication application. The optical buffer structure is based on two parallel waveguides made of high refractive index material with subwavelength dimensions. They are suspended in air, and are separated b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 18 13 شماره
صفحات -
تاریخ انتشار 2010