PI/PISMC Control of Hydraulically Actuated Active Suspension System
نویسنده
چکیده
The purpose of this paper is to present a robust strategy in controlling a hydraulically actuated active suspension system. The controller consists of the two controller loops namely inner loop controller for force tracking control of the hydraulic actuator and outer loop controller to reject the effects of road induced disturbances. The outer loop controller utilized a proportional integral sliding mode control (PISMC) scheme. Whereas, proportional integral (PI) control is used in the inner loop controller to track the hydraulic actuator in such a way that it able to provide the actual force as close as possible with the optimum target force produced by the PISMC controller. A quarter-car model is used in this study and the performance of the controller is compared with the state feedback controller and the existing passive suspension system. A simulation study is performed to prove the effectiveness and robustness of the control approach. Force tracking performance of the hydraulic actuator is also investigated.
منابع مشابه
Design and Control of a Hydraulic Human Power Amplifier
1 2 This paper describes the design of and some preliminary control results for a hydraulically actuated human power amplifier. The system is in the form of an oar, with its reach and pitch degrees of freedom being hydraulically assisted. A robust PI force controller is proposed so that the hydraulic actuator force tracks a scaled copy of the force exerted by the human. Nonlinearities and uncer...
متن کاملActive Suspension System Control Using Adaptive Neuro Fuzzy (ANFIS) Controller
The purpose of designing the active suspension systems is providing comfort riding and good handling in different road disturbances. In this paper a novel control method based on adaptive neuro fuzzy system in active suspension system is proposed. Choosing the proper data base to train the ANFIS has an important role in increasing the suspension system’s performance. The data base which is used...
متن کاملWaste tank cleanup manipulator modeling and control
Waste tank Cleanup is a current application area for robotics in the United States. As a result of tank access restrictions, (e.g., limited number and size of manholes), designs for several current waste Cleanup manipulator systems have long links with small cross-sections and variable lengths. In addition, as a result of anticipated payload capacity, these manipulator designs are hydraulically...
متن کاملDynamic Trot-Walking with the Hydraulic Quadruped Robot - HyQ: Analytical Trajectory Generation and Active Compliance Control
This paper presents a trajectory generator and an active compliance control scheme, unified in a framework to synthesize dynamic, feasible and compliant trot-walking locomotion cycles for a stiff-by-nature hydraulically actuated quadruped robot. At the outset, a CoP-based trajectory generator that is constructed using an analytical solution is implemented to obtain feasible and dynamically bala...
متن کاملSliding Mode Control of Half-car Active Suspension
The purpose of the sliding mode controller for a vehicle suspension system is to reduce the discomfort sensed by passengers which arises from road roughness and to increase the ride handling associated with the pitching and rolling movements. This necessitates a very fast and accurate controller to meet as much control objectives, as possible. This paper deals with introducing a new technique s...
متن کامل