Initial Results of Rf Gun Experiment

نویسندگان

  • H. Abe
  • T. Asaka
  • H. Hanaki
  • A. Mizuno
  • S. Suzuki
  • T. Taniuchi
  • K. Yanagida
چکیده

A photocathode RF gun was built and it has been operated for beam measurement at SPring-8. The cavity was tested by using high power RF up to 18 MW. The electric field gradient on the cathode reached 127 MW/m. After RF conditioning, a laser pulse was irradiated on a copper cathode and the photo-emitted beam was accelerated up to 2.9 MeV. An effective quantum efficiency of the cathode was obtained by changing laser power and field gradient.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

rookhaven photocathode rf gun

The Brookhaven Accelerator Test Facility (ATF) uses a photocathode rf gun to provide a high-brightness electron beam intended for FEL and laser acceleration experiments. The rf gun consists of 1-,' cells driven at 2856 MHz in 7r-mode with a maximum cathode field of 100 MV/m. To achieve long lifetimes, our photocathode development concentrates on robust metals such as copper, yttrium and samariu...

متن کامل

اندازه‌گیری‌های ماکروی کم توان بر روی نمونه اولیه تفنگ الکترونی بسامدرادیویی چشمه نور ایران

In this paper, we introduce RF electron gun of Iranian Light Source Facility (ILSF) pre-injection system. Design, fabrication and low-power microwave tests results of the prototype RF electron gun have been described in detail. This paper also explains the tuning procedure of the prototype RF electron gun to the desired resonant frequency. The outcomes of this project brighten the path to the f...

متن کامل

طراحی و ساخت پیش تزریق‌گر الکترون چشمه نور ایران

Every synchrotron accelerator requires a pre-injector for primary injection of the electrons into the booster ring. The Iranian Light Source Facility (ILSF) pre-injector is a 150 MeV S-band linear accelerator with a thermionic cathode RF gun. The design of the pre-injector lattice and its beam dynamics calculation results together with the design of RF gun, alpha magnet, quadrupole magnets and ...

متن کامل

BEAM QUALITY MEASUREMENT OF 100-MeV TEST LINAC

The 100-MeV Test Linac was constructed for the high brightness applications such as free electron lasers and coherent radiation generation experiments at PAL. The linac consists of a thermionic RF-gun, an alpha magnet, two accelerating structures, and a beam analysing magnet. The RF-gun is a one-cell cavity with a tungsten dispenser cathode of 3-mm diameter, and the longitudinal matching from t...

متن کامل

Use of Coherent Transition Radiation to Set up the Aps Rf Thermionic Gun to Produce High-brightness Beams for Sase Fel Experiments

We describe use of the Advanced Photon Source (APS) rf thermionic gun [1], alpha-magnet beamline, and linac [2] to produce a stable high-brightness beam in excess of 100 amperes peak current with normalized emittance of 10 π mm-mrad. To obtain peak currents greater than 100 amperes, the rf gun system must be tuned to produce a FWHM bunch length on the order of 350 fs. Bunch lengths this short a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1999