Impact of 3.0 T Cardiac MR Imaging Using Dual-Source Parallel Radiofrequency Transmission with Patient-Adaptive B1 Shimming

OBJECTIVES To prospectively evaluate the impact of 3.0 T Cardiac MR imaging using dual-source parallel radiofrequency (RF) transmission with patient-adaptive B1 shimming compared with single-source RF transmission in the RF homogeneity, image contrast and image quality. METHODS The study was approved by the local institutional review board, and all subjects provided written informed consent. Fourteen healthy volunteers were examined at 3.0 T MR, with both the conventional single-source and the new dual-source RF transmission. B1 calibrations (RF shimming) of the heart region were performed to acquire a percent of the prescribed flip angle (FA) of B1 maps, which were used for quantitative assessment of RF homogeneity. Contrast ratios (CRs) between ventricular blood pool and septum were calculated on balanced-turbo field echo (B-TFE) cine images. The off-resonance artifacts of cine images were blindly assessed by two radiologists according to a 4-point grading-scale. RESULTS A significantly lower mean coefficients of variance of the achieved FA with dual-source revealed better RF homogeneity compared to single-source (P = 0.0094). Dual-source RF shimming significantly increased the CRs (P<0.05) and reduced the off-resonance artifacts of B-TFE cine images (P<0.05). Inter-observer agreement for the off-resonance artifacts of B-TFE cine images was good to excellent (k >0.65). CONCLUSIONS Dual-source parallel RF transmission significantly improves the RF homogeneity, increases image contrast and reduces image artifacts of cardiac B-TFE images compared to single-source mode. This may be of value in reducing the observer-dependence of cardiac MR images and enhancing diagnostic confidence for clinical practice using CMR at 3.0 T.