Synthesis, Structural, and Adsorption Properties and Thermal Stability of Nanohydroxyapatite/Polysaccharide Composites
نویسندگان
چکیده
A series of composites based on nanohydroxyapatite (nHAp) and natural polysaccharides (PS) (nHAp/agar, nHAp/chitosan, nHAp/pectin FB300, nHAp/pectin APA103, nHAp/sodium alginate) was synthesized by liquid-phase two-step method and characterized using nitrogen adsorption-desorption, DSC, TG, FTIR spectroscopy, and SEM. The analysis of nitrogen adsorption-desorption data shows that composites with a nHAp: PS ratio of 4:1 exhibit a sufficiently high specific surface area from 49 to 82 m2/g. The incremental pore size distributions indicate mainly mesoporosity. The composites with the component ratio 1:1 preferably form a film-like structure, and the value of S BET varies from 0.3 to 43 m2/g depending on the nature of a polysaccharide. Adsorption of Sr(II) on the composites from the aqueous solutions has been studied. The thermal properties of polysaccharides alone and in nHAp/PS show the influence of nHAp, since there is a shift of characteristic DSC and DTG peaks. FTIR spectroscopy data confirm the presence of functional groups typical for nHAp as well as polysaccharides in composites. Structure and morphological characteristics of the composites are strongly dependent on the ratio of components, since nHAp/PS at 4:1 have relatively large S BET values and a good ability to adsorb metal ions. The comparison of the adsorption capacity with respect to Sr(II) of nHAp, polysaccharides, and composites shows that it of the latter is higher than that of nHAp (per 1 m2 of surface).
منابع مشابه
Synthesis & study of Polyethylene/Polyaniline/Montmorillonite ductile nano composites properties
Conducting polymers, because of their special properties, are used to introduce conductive polymeric composites. Also, clays have recently been used for preparation of polymer composites with enhanced mechanical and thermal properties. The aim of this work is to study the synergetic effect of the co-presence of conducting polyaniline and montmorillonite in the polyethylene matrix. Polyethylene ...
متن کاملSynthesis & study of Polyethylene/Polyaniline/Montmorillonite ductile nano composites properties
Conducting polymers, because of their special properties, are used to introduce conductive polymeric composites. Also, clays have recently been used for preparation of polymer composites with enhanced mechanical and thermal properties. The aim of this work is to study the synergetic effect of the co-presence of conducting polyaniline and montmorillonite in the polyethylene matrix. Polyethylene ...
متن کاملThermal Stability and Dynamic Mechanical Properties of Nano and Micron-TiO2 Particles Reinforced Epoxy Composites: Effect of Mixing Method
متن کامل
Investigating the effects of chemical modification of clay nanoparticles on thermal degradation and mechanical properties of TPU/nanoclay composites
Thermoplastic polyurethane (TPU)/clay nanocomposites were prepared via a melt-compounding method using ester type TPU and two different modified organoclays (Cloisite 30B and Cloisite 15A) in different contents. The Effects of the chemical structure and content of the nanoclays on the thermal degradation and mechanical properties of TPU were also investigated. The effect of structural modificat...
متن کاملOptical, Thermal and Structural Properties of CdS Quantum Dots Synthesized by A Simple Chemical Route
The present work deals with the synthesis and characterization of CdS nanoparticles with good thermal stability and optical properties by a novel and simple synthetic route. The nanoparticles were synthesized via chemical precipitation method in a single reaction vessel under ambient conditions. The prepared CdS nanoparticles were compared with the bulk CdS. The Optical properties were determin...
متن کامل