Study of Electromagnetic Field in Claw-poles Alternator
ثبت نشده
چکیده
The paper presents the tridimensional analysis of electromagnetic field of an claw poles alternator, in whose construction has been used non-magnetic material, such aluminum, that form the rings in the rotor’s structure. This structure aims to establish lower levels of saturation in the claw-pole of Lundell alternator. Reducing the level of saturation in the rotor, lead to reduction of the losses in hysteresis, the power will be exchangeable in the output of the machine, while achieving its growth the performances.
منابع مشابه
Numerical modeling of claw-poles alternator
The paper present a program of modeling of a claw-poles alternator with the program Magnet 6.11, which after the input data of machine realize the geometrical model for numerical analyzes. After analysis, the program can be changed automatically and made a new model, that can be analyzed automatically and not being necessarily construction the model with the drawing program each time its necess...
متن کاملWeC2-1 : Foil Field Lundell Alternator with Rotating Power Electronics
The power requirements of automotive alternators are increasing significantly due to the introduction of new vehicle electrical loads. We aim to improve alternator power density with the use of a foil field winding in the Lundell or claw-pole alternator. Foil field windings are shown to provide higher conductor packing factors than conventional wire wound fields (e.g. 73% as opposed to 64% for ...
متن کاملElectromagnetic field analysis of novel low cogging force, linear switched reluctance motor, based on 2-D finite element method
This paper deals with electromagnetic design and 2-D (two-dimensional) magnetic field analysis of novel low force ripple linear switched reluctance (LSR) motor. The configuration that has been presented here has a higher number of rotor poles than stator poles, and the purpose of this configuration is to improve the force ripple, which is the weak point of LSRMs. In order to illustrate the ...
متن کاملEmbedded Simple Excited Automotive Alternator Modeling using Magnetic Equivalent Circuits
Received Jun 12, 2016 Revised Nov 28, 2016 Accepted Dec 12, 2016 This paper presents the modeling by Magnetic Equivalent Circuit model (MEC) of a Simple Excited Automotive Alternator (SE2A) where DCexcitation winding is transferred from rotor side to statorone rather than in conventional automotive claw pole alternators, to overcome the disadvantages of the ring-brush system. Following the reso...
متن کاملAn Hybrid-Excited Flux-Switching Machine for High Speed DC-Alternator Applications
This paper presents a new topology of Hybrid Excited Flux-Switching Machine (HE FSM) with excitation coils located in stator slots (or inner DC windings). After describing the three phase structure to be investigated, the working principle is discussed and main electromagnetic performances are simulated by Finite Element (FE) Analysis. It is demonstrated that the airgap field can be easily cont...
متن کامل