Design, Fabrication and Rf Measurement of a W–band Accelerating Structure

نویسندگان

  • R. Merte
  • H. Henke
  • R. Apel
چکیده

The paper presents a design of a W-band planar accelerating structure (muffin tin) [1]. The structure is a 2 /3-mode traveling wave, constant impedance structure with an operating frequency of 91.392 GHz. The design includes a new power coupler and a cavity geometry optimized for high shunt impedance. A 7–cell cold test prototype has been fabricated by wire electro discharge machining. Measurements were performed with a scalar network analyzer for both Sparameters and bead pull measurements. The RF parameters and measured results are presented and compared with the numerical results obtained by GdfidL [3] simulations.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design, Fabrication and Measurement of Two-Layered Quadruple-Band Microwave Metamaterial Absorber

The design, simulation, fabrication, and measurement of two structures of metamaterial absorbers (MA) is investigated at microwave frequency in this paper. By stacking of one layer structure on the top of each other, a two-layered structure is generated. The unit cell at each layer consisting of two sets of various circular and square patches are designed so that the structure exhibit quad band...

متن کامل

Fabrication and Initial Tests of an Ultra-high Gradient Compact S-band (hgs) Accelerating Structure

RadiaBeam Technologies reports on the RF design and fabrication of a ultra-high gradient (50 MV/m) S-Band accelerating structure (HGS) operating in the pi-mode at 2.856 GHz. The compact HGS structure offers a drop-in replacement for conventional S-Band linacs in research and industrial applications such as drivers for compact light sources, medical and security systems. The electromagnetic desi...

متن کامل

New Low Cost Printed Antenna CPW-Fed for Global Positioning System, Personal Communication System and Worldwide Interoperability for Microwave Access Band Applications (TECHNICAL NOTE)

This paper presents a new design of a CPW-Fed multi bands planar antenna. This antenna can be integrated easily with passive and active elements. The proposed antenna is suitable to operate for GPS, PCS and WiMAX bands. Its entire area is 52.3x52.6mm2 and is employed on an FR-4 epoxy substrate and fed by a 50 Ohm coplanar line. The antenna parameters have been analyzed and optimized by using AD...

متن کامل

Ultra-high Gradient Compact S-band Accelerating Structure

In this paper, we present the radio-frequency design of the DECA (Doubled Energy Compact Accelerator) Sband accelerating structure operating in the pi-mode at 2.856 GHz, where RF power sources are commonly available. The development of the DECA structure will offer an ultra-compact drop-in replacement for a conventional S-band Linac in research and industrial applications such as drivers for co...

متن کامل

طراحی، ساخت و مقایسه دو ترکیب کننده توان با محفظه هم‌محور و استوانه‌ای

Resonant structure is one of the proposed methods in combining power in RF systems of  RF accelerators. In this structure, fabrication of RF power divider or combiner using coaxial and cylindrical cavity is important. In this study, two combiners, in the same frequency band, are designed and fabricated; and their results are compared. The experimental results confirmed the simulation results an...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1999