CO sensing performance in micro-arc oxidized TiO2 films for air quality control

نویسندگان

  • Youn-Ki Jun
  • Hyun-Su Kim
  • Jong-Heun Lee
  • Seong-Hyeon Hong
چکیده

Porous TiO2 films were prepared by the micro-arc oxidation (MAO) of Ti plates, and their CO sensing properties at low concentrations (5–100 ppm) were investigated as an application for an air quality control sensor. The obtained rutile films exhibited the maximum CO gas response at 350 ◦C, which is typical for semiconductor-type gas sensors, and the Ra/Rg was ∼1.6 for 10 ppm CO (Ra: resistance in air, Rg: resistance in a sample gas). The magnitude of the gas response increased almost linearly with increasing the CO concentration from 5 to 100 ppm. The CO sensing performance of the TiO2 sensor in the presence of humidity was investigated and compared with that of a SnO2 sensor. © 2006 Elsevier B.V. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design and investigation of TiO2 –SiO2 thin films on AISI 316L stainless steel for tribological properties and corrosion protection

The TiO2–SiO2 thin films were deposited on AISI 316L stainless steel via sol-gel method. Then, the effect of the added amount of SiO2 on the structure, morphology and mechanical properties of the films and corrosion behavior of AISI 316L stainless steel substrate were investigated. So, X-ray diffraction, field-emission scanning electron microscopy, atomic force microscopy, depth-sensing indenta...

متن کامل

Synthesis and electrochemical studies on Cu-TiO2 thin films deposited by spray pyrolysis technique for sensing Uric acid

In this study, we report an effective uric acid (UA) electrochemical biosensor using Cu-TiO2 electrode. UA is a biomedical compound that plays a vital role in human metabolism. The abnormal level of UA leads to several diseases. TiO2 and Cu-TiO2 with various concentrations were deposited on glass substrates by spray pyrolysis technique. The structural study show...

متن کامل

Non-Vacuum Processed Polymer Composite Antireflection Coating Films for Silicon Solar Cells

A non-vacuum processing method for preparing polymer-based ZrO2/TiO2 multilayer structure antireflection coating (ARC) films for crystalline silicon solar cells by spin coating is introduced. Initially, ZrO2, TiO2 and surface deactivated-TiO2 (SD-TiO2) based films were examined separately and the effect of photocatalytic properties of TiO2 film on the reflectivity on silicon surface was investi...

متن کامل

Formation of oxygen vacancies and Ti3+ state in TiO2 thin film and enhanced optical properties by air plasma treatment

This is the first time we report that simply air plasma treatment can also enhances the optical absorbance and absorption region of titanium oxide (TiO2) films, while keeping them transparent. TiO2 thin films having moderate doping of Fe and Co exhibit significant enhancement in the aforementioned optical properties upon air plasma treatment. The moderate doping could facilitate the formation o...

متن کامل

THE ANALYSIS OF STRUCTURE FOR THE MULTI-LAYERED OF Ge/TiO2 FILMS PREPARED BY THE DIFFERENTIAL PRRESSURE CO-SPUTTERING ANALIZA STRUKTURY WIELOWARSTWOWYCH FILMÓW Ge/TiO2 WYTWARZANYCH METODĄ RÓŻNICOWO-CIŚNIENIOWEGO WSPÓŁROZPYLANIA JONOWEGO

We tried to fabricate the Ge/TiO2 composite films with the differential pressure (pumping) co-sputtering (DPCS) apparatus in order to improve the optical properties. In the study, the micro structure of these thin films has been evaluated. TEM image revealed that the thin film was alternately layered with TiO2 and Ge, lattice fringes were observed both of Ge layer and TiO2 layer. There were por...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015