Electrical Characteristics and Behavioral Model of Spiral Inductors on Gaas Substrate

نویسندگان

  • S. J. Pan
  • L. W. Li
  • W. Y. Yin
  • M. S. Leong
چکیده

Extensive experimental results for various square spiral inductors on GaAs substrate are presented in this paper. Through detailed studies of the inductances extracted from the de-embedded onchip measured S-parameters, the relationships between the electrical characteristics and the geometrical parameters of the spiral inductors are revealed. Based on the curve fitting technique, a behavioral model for spiral inductors is obtained and presented. Thus, the inductances of spiral inductors with an acceptable accuracy up to their first resonance frequencies are obtained.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

An Efficient Technique for Substrate Coupling Parasitic Extraction with Application to RF/Microwave Spiral Inductors (RESEARCH NOTE)

This paper presents an efficient modeling method, based on the microstrip lines theory, for the coupling between a sub­strate backplane and a device contact. We derive simple closed-form formulas for rapid extraction of substrate parasitics. We use these formulas to model spiral inductors as important substrate-noise sources in mixed-signal systems. The proposed model is verified for the freque...

متن کامل

Physical Modeling of Spiral Inductors on Silicon

This paper presents a physical model for planar spiral inductors on silicon, which accounts for eddy current effect in the conductor, crossover capacitance between the spiral and center-tap, capacitance between the spiral and substrate, substrate ohmic loss, and substrate capacitance. The model has been confirmed with measured results of inductors having a wide range of layout and process param...

متن کامل

Electrical Characteristics of Planar Spiral Inductors

This paper describes two types of PEEC-based methods for the analysis of planar spiral inductors. One approach is a high-level distributed network method (DNM), while the second is based on a relatively simple equivalent SPICE circuit. The inductors are printed on lossless, grounded ceramic substrates and the metallization is assumed to have finite conductivity, but is infinitesimally thin, so ...

متن کامل

Compact Wide-Band Modelling of Spiral Inductors for RFICs using Particle Swarm Optimization

The exponential growth in commercial wireless and wired communication market has given rise to considerable interest in low power, low noise and low cost radio frequency integrated circuits (RFIC). Traditionally RFICs are fabricated using the expensive GaAs technologies for frequencies upto 40GHz. The development of deep sub micron CMOS technology processes allow silicon RFICs to compete with h...

متن کامل

Design and Fabrication of High-Q Spiral Inductors Using MEMS Technology

This paper presents the design and modeling, fabrication and characterization of suspended spiral inductors on silicon substrate. The substrate materials underneath the inductor coil are removed by micromachining process to reduce the substrate loss which enables high frequency operation. A complete Library of spiral inductors with different line width, line spacing and number of turns have bee...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007