Computational analysis of transitional air flow through packed columns of spheres using the finite volume technique
نویسندگان
چکیده
We compare computational simulations of the flow of air through a packed column containing spherical particles with experimental and theoretical results for equivalent beds. The column contained 160 spherical particles at an aspect ratio N = 7.14, and the experiments and simulations were carried out at particle Reynolds numbers of (Redp = 700 − 5000). Experimental measurements were taken of the pressure drop across the column and compared with the correlation of Reichelt (1972) using the fitted coefficients of Eisfeld and Schnitzlein (2001). An equivalent computational domain was prepared using Monte Carlo packing, from which computational meshes were generated and analysed in detail. Computational Fluid Dynamics calculations of the air flow through the simulated bed was then performed using the finite volume technique. Results for pressure drop across the column were found to correlate strongly with the experimental data and the literature correlation. The flow structure through the bed was also analysed in detail.
منابع مشابه
Flow Re-Stabilizing Observation via Air Injection during the Rotating Stall through a Single-stage Axial Compressor by a 2-D Finite-volume Approach
The air-injection as an active flow stabilizing techniques, were numerically examined in current work, during the aerodynamic behavior and the characteristics of an axial compressor. At first, in design condition the characteristic curve was numerically captured for a specified test compressor. The computed results showed good agreements with those obtained from the experiments, to validate the...
متن کاملCOMSOL Multiphysics® Simulation of 3D Single-Phase Transport in a Random Packed Bed of Spheres
Packed beds are important in the chemical industries in separations and as catalytic reactors. The standard approach to modeling the complex particle/tube arrangement is to employ an effective medium approach with one-dimensional flow and lumped transport parameters. Simplification of the flow and estimation of the transport quantities is usually by experiment and empiricism. Computational flui...
متن کاملHeat Transfer in a Column Packed With Spheres
The purpose of the study is to investigate average and local surface heat transfer coefficients in a cylinder packed with spheres. Here the term «local» applies to a single sphere within the bed. Averages are derived from the sixteen different spheres that were instrumented and distributed throughout the bed. The experimental technique consisted of introducing a step - wise change in the temper...
متن کاملHydrogen sulfide removal from biogas using chemical absorption technique in packed column reactors
The toxicity and corrosion potential of hydrogen sulfide in raw biogas underlines the need for biogas purification. Several techniques available for removal of hydrogen sulfide from biogas are out of the reach for common end users due to lack of knowledge, higher running costs, and insufficient operational skills. The present experimental study aims to propagate hydrogen sulfide removal techniq...
متن کاملCOMPUTER SIMULATION OF FLUID FLOW FILLING DURING MOLD USING FINITE VOLUME METHOD
In this investigation, ^5 2-D Finite Volume Method (FVM) with unstructured triangular mesh is developed to simulate the mould filling process. The simulation of fluid flow and track of free surface is based on the Marker And Cell (MAC) technique. This technique has capability ofhandling the arbitrary curved solid boundaries in the casting processes. In order to verify the computational results ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Computers & Chemical Engineering
دوره 34 شماره
صفحات -
تاریخ انتشار 2010