Low Load Twist Compression Study
نویسنده
چکیده
IRDI – An Overview IRDI (Industrial Research + Development Institute) is located in Midland, Ontario, Canada. IRDI was founded in 1992 by two local business entrepreneurs as an industry-driven research institute. IRDI moved to its current location in 1995, and is still housed within this industrial-scale 55,000 square foot facility that was acquired by Georgian College of Applied Arts and Technology (Barrie, Ontario) in July 2003. IRDI bridges the gap between the laboratory and the shop floor. Studies range from laboratory testing and data analysis using bench top to production-scale equipment on the shop floor. IRDI’s focus is research and technology development in the field of tribology, specifically as it relates to metal forming processes such as hydroforming, drawing and stamping. In addition, our focus expands to include formability studies as well as a general systems approach to solve problems related to the friction and wear of surfaces (metals, plastics or composites) in contact.
منابع مشابه
تخمین بار فشاری تجمعی وارد بر مهره چهارم و پنجم کمر در قالیبافان از طریق تکنیک شیب سنجی وضعیت تنه و مشاهده مستقیم در طول یک شیفت کاری
Background and aims: Epidemiological studies have shown a significant correlation between awkward back posture and low back pain among carpet weavers. Therefore, this study aims for estimating cumulative compression load among carpet weavers during a shift work. Methods: In this study, the awkward back postures of 4 male and 9 female carpet weavers were monitored, using electronic inclinometer...
متن کاملToward an Improvement of Natural Gas-diesel Dual Fuel Engine Operation at Part Load Condition by Detail CFD Simulation
Natural gas-diesel dual fuel combustion is a beneficial strategy for achieving high efficient and low emissions operation in compression ignition engines, especially in genset application heavy duty diesel engine at rated power. This study aims to investigate a dual fuel engine performance and emissions using premixed natural gas and early direct injection of diesel fuel. Due to the different r...
متن کاملA numerical and experimental study on buckling and post-buckling of cracked plates under axial compression load
Existence of cracks in industrial structures is one of the important causes of their failure, especially when they are subjected to important axial compressive forces that might lead to buckling. Therefore, it must be considered in stress analysis and designing and loading of such structures. In this paper, the buckling and post-buckling behaviors of stainless-steel cracked plates under axial c...
متن کاملStability Analysis of Laminated Cylindrical Shells under Combined Axial Compression and Non-Uniform External Pressure
This study investigates geometrical non-linear analysis of composite circular cylindrical shells under external pressure over part of their surfaces and also shells subjected to combined axial compression and triangular external pressure. Donnell non-linear shell theory along with first order shear deformation theory (FOSD) are adopted in the analysis. In the case of combined axial compression ...
متن کاملThe contribution of load magnitude and number of load cycles to cumulative low-back load estimations: a study based on in-vitro compression data.
BACKGROUND Cumulative low-back load is suggested to be associated with low back pain, possibly due to (micro-)fractures of spinal segments. Based on available in vitro data it can be assumed that, in order to predict spine segment failure from cumulative compressive loading, load magnitude should be weighted with an exponent higher than one, whereas the number of cycles should be weighted with ...
متن کاملEmission Performance of a Diesel Engine Running on Biodiesel Fuel at Different Compression Ratios
In the present study emission performance of a diesel engine (Lister Petter) was evaluated at different compression ratios and engine loads with soybean methyl ester and its 25%, 50%, 75% blends with diesel fuel at constant speed 1500 rpm. Exhaust emissions included CO, CO2, HC and NOx. The compression ratio and engine load varied from 14 to 20 with an interval 1 and 25 to...
متن کامل