The Application of Auto-Disturbance Rejection Control Optimized by Least Squares Support Vector Machines Method and Time-Frequency Representation in Voltage Source Converter-High Voltage Direct Current System
نویسندگان
چکیده
In order to improve the performance of voltage source converter-high voltage direct current (VSC-HVDC) system, we propose an improved auto-disturbance rejection control (ADRC) method based on least squares support vector machines (LSSVM) in the rectifier side. Firstly, we deduce the high frequency transient mathematical model of VSC-HVDC system. Then we investigate the ADRC and LSSVM principles. We ignore the tracking differentiator in the ADRC controller aiming to improve the system dynamic response speed. On this basis, we derive the mathematical model of ADRC controller optimized by LSSVM for direct current voltage loop. Finally we carry out simulations to verify the feasibility and effectiveness of our proposed control method. In addition, we employ the time-frequency representation methods, i.e., Wigner-Ville distribution (WVD) and adaptive optimal kernel (AOK) time-frequency representation, to demonstrate our proposed method performs better than the traditional method from the perspective of energy distribution in time and frequency plane.
منابع مشابه
Pumped Storage Power Plant Control System Modeling by Applying VSI and Vector control principle
This paper includes modeling and simulation of 180 MW units of pumped storage power plant with Variable speed machines. In this method, voltage source inverters are used instead of traditional cyclo-converters. This paper aims to control the voltage source inverters and maintain DC voltage at a constant value. AC/ DC/ AC converter is used in system configuration structure in order to control an...
متن کاملA Novel Control Strategy for a Single-phase Grid-connected Power Injection System
In this paper, a novel and simple control strategy, based on state feedback method is suggested to control the power injection system (PIS). The considered PIS is composed of, a DC voltage source, a voltage source inverter (VSI) and a L-C-L filter. The DC source includes the battery source with boosted voltage. The battery can be charged with photovoltaic cells. Since, the grid voltage acts as ...
متن کاملVoltage Regulation of a Negative Output Luo Converter Using a PD-PI Type Sliding Mode Current Controller
This paper describes a new design for direct sliding mode method with a high switching frequency using the PD-PI type sliding surface applied to a negative output Luo converter worked in continuous current mode for applications required constant power source such as aerospace applications, medical equipment and etc. Because of the output power and line changes, the converter model is also nonli...
متن کاملکاهش ولتاژ وجه مشترک در مبدل ماتریسی با حذف بردار صفر
Matrix Converter (MC) is a direct energy conversion device with high input power factor. In the Direct Matrix Converter modulation, the Space Vector Modulation (SVM) method by simultaneous control of the input current and output voltage is used. In this method sum of the phase voltages in the central point of load is nonzero, then nonzero Common-Mode Voltage (CMV) in central point is produce...
متن کاملA Combined Vector and Direct Power Control for AC/DC/AC Converters in DFIG Based Wind Turbine
The doubly-fed generators (DFIG) have clear superiority for the applications of large capacity and limited-range speed control case due to the partially rated inverter, lower cost and high reliability. These characteristics enable the doubly-fed wound rotor induction machine to have vast applications in wind-driven generation.In this paper Combined Vector and direct power control (CVDPC) strate...
متن کامل