Microstructural Characterisation of Chromium Slags
ثبت نشده
چکیده
J. Burja, F. Tehovnik, F. Vode, B. Arh, Institute of Metals and Technology, Ljubljana, Slovenia In this chromium slags that form during melting of chromium alloyed steels are examined. During melting and oxidation of these steel grades a considerable amount of chromium is lost, and gained back with slag reduction. Laboratory experiments were performed to study the mechanism of chromium oxide reduction by silicon. Slags chemistry and phase composition have a strong effect on the steelmaking process. Phase analysis revealed two types of chromium oxides, calcium chromites and chromite spinels dependent on chemistry and basicity of the slag.
منابع مشابه
Surface Hardness Measurment and Microstructural Characterisation of Steel by X-Ray Diffraction Profile Analysis
An X-ray diffraction line will broaden considerably when steels change into martensitic structure on quenching. The results presented in this paper show that X-ray diffraction technique can be employed for a rapid and nondestructive measurement of hardness of hardened steel. Measurement on various quenched and tempered steels showed that the breadth of its diffraction peak increased with increa...
متن کاملExperimental Study on the Behavior of TiN and Ti2O3 Inclusions in Contact with CaO‐Al2O3‐SiO2‐MgO Slags
TiN and Ti2O3 are the predominant inclusion types in Ti-alloyed ferritic chromium stainless steels. In order to ensure the required steel cleanness level, an effective removal of such inclusions in the slag during secondary metallurgy is essential. This inclusion removal predominantly takes place via dissolution of the inclusion in the slag. The dissolution behavior of TiN and Ti2O3 in CaO-SiO2...
متن کاملDevelopment and chromium uptake in hybrid poplars cultivated on substrate polluted with industrial slags
The report aims at improving knowledge of the interaction between poplar and heavy metals and at parsing the poplar ability to remove or render harmless such inorganic elements contained in residual slags of leatherindustries. Scions of Populus x euramericana, clone I-214, were grown outdoors, in pots, in inert soil, pruned for a single shoot and subjected to three treatments: non-amended (C), ...
متن کاملFeasibility of Polysulfone as Base Polymer in a Polymer Inclusion Membrane: Synthesis and Characterisation
Polysulfone was investigated as an alternative base-polymer for polymer inclusion membranes (PIM’s) that could withstand harsh environmental conditions and have good transport efficiency of metal ions. PIM’s were prepared using polysulfone as a base polymer and Aliquat 336 as a carrier in the absence of a plasticizer. Chromium (VI) was used as standard to study the extraction efficiency of the ...
متن کاملAccelerated Carbonation of Steel Slag Compacts: Development of High-Strength Construction Materials
Mineral carbonation involves the capture and storage of carbon dioxide in carbonate minerals. Mineral carbonation presents opportunities for the recycling of steel slags and other alkaline residues that are currently landfilled. The Carbstone process was initially developed to transform non-hydraulic steel slags [stainless steel (SS) slag and basic oxygen furnace (BOF) slags] in high-quality co...
متن کامل