Microprocessor controller for EL-1 ID ellipsometer
نویسنده
چکیده
The purpose of the microprocessor – based controller described in the present study is to enable the measurements by means of EL-11D ellipsometer system to be carried in automatic mode. The geometry of optic components of the ellipsometer system can be changed in MANUAL and AUTOMATIC modes by means of the controller. Three keys incorporated on the front panel are used for setting of the ellipsometer in MANUAL mode. The controller management in AUTOMATIC mode is possible via serial transmission link from any IBM personal computer.
منابع مشابه
Microprocessor controller for EL-11D ellipsometer
The purpose of the microprocessor – based controller described in the present study is to enable the measurements by means of EL-11D ellipsometer system to be carried in automatic mode. The geometry of optic components of the ellipsometer system can be changed in MANUAL and AUTOMATIC modes by means of the controller. Three keys incorporated on the front panel are used for setting of the ellipso...
متن کاملBasic Issues in Identification Scheme of a Self-Tuning Power System Stabilizer
Power system stabilizers have been widely used and successfully implemented for the improvement of power system damping. However, a fixed parameter power system stabilizer tends to be sensitive to variations in generator dynamics so that, for operating conditions away from those used for design, the effectiveness of the stabilizer can be greatly impaired. With the advent of microprocessor techn...
متن کاملDesign of a hybrid fuzzy logic proportional plus conventional integral-derivative controller
This paper presents approaches to the design of a hybrid fuzzy logic proportional plus conventional integralderivative (fuzzy P+ID) controller in an incremental form. This controller is constructed by using an incremental fuzzy logic controller in place of the proportional term in a conventional PID controller. By using the bounded-input/bounded-output “small gain theorem,” the sufficient condi...
متن کاملHigh precision alignment procedure for an ellipsometer.
Beam deviation in the polarizing elements is identified as a significant source of error in existing ellipsometer alignment procedures. A high precision alignment procedure that eliminates these errors is described. This procedure is less time consuming than previous methods, and its accuracy is comparable to the limit of resolution of the ellipsometer (typically 0.01-0.005 degrees ). A further...
متن کاملDevelopment of an Automatic Null Ellipsometer for Sputtering Rate Monitoring of EUV Multilayer Fabrication
Instrumentation To overcome current difficulty of absolute period control in the EUV multilayer fabrication by sputtering, we have developed an automatic null ellipsometer as a sputtering rate monitor having high enough picometer thickness sensitivity enabling accurate monitoring of the nm period multilayer fabrication [1]. Figure 1 shows schematic drawing of the ellipsometer installed as the s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Annales UMCS, Informatica
دوره 3 شماره
صفحات -
تاریخ انتشار 2005