Shoe Grinding Cell using Virtual Mechanism Approach
نویسندگان
چکیده
The paper describes the automation of the shoe grinding process using an industrial robot. One of the major problems of flexible automation using industrial robots is how to avoid joint limitations, singular configuration and obstacles. This problem can be solved using kinematically redundant robots. Due to the circular shape of the grinding disc, the robot becomes kinematically redundant. This task redundancy was efficiently handled using virtual mechanism approach, where the tool is described as a serial mechanism.
منابع مشابه
Micro Cutting Simulation of Abrasive Grains in the Grinding Process
In the current work we present approach to study the mechanism of the cutting of abrasive grains in the grinding wheel using finite element analysis (FEA). The simulation process is done by separating two abrasive grains from the grinding wheels and the microprocess of material removal in the case of surface grinding is simulated. Modelling was done on the workpiece steel S-7 and material grain...
متن کاملDetermining the Optimal Strategy of Multi Virtual Power Plants using GA-GT
abstract: In the present work, determining the optimal strategy(profit based) of multi virtual power plants (VPPs) as well as the objective of maximizing profit through the multi-level control of VPPs are discussed by the micro-grid utilization center including virtual power plants. VPPs include renewable resources such as wind farms, photovoltaic, and conventional resources such as fuel cell, ...
متن کاملParametric optimization of cylindrical grinding process through hybrid Taguchi method and RSM approach using genetic algorithm
The present investigation proposes a hybrid technique: Taguchi method, response surface methodology (RSM) and genetic algorithm (GA), to analyze, model and predict vibration and surface roughness in traverse cut cylindrical grinding of aluminum alloy. Experiments have been conducted as per L9 orthogonal array of Taguchi methodology using several levels of the grinding parameters. Analysis of va...
متن کاملVirtual Engineering Approach To Developing Selective Harvest Technologies 2005 ASAE Annual International Meeting
Agricultural crop residues (e.g., straw and stover) are a current focus for bioenergy feedstocks, with new technologies being developed to improve the economics of bioenergy production. Among the emerging technologies focused on feedstock engineering is the selective harvest concept. Due to the complexity of the biomass separations required for addressing the challenges and requirements of sele...
متن کاملAn investigation of the corrosive wear of steel balls in grinding of sulphide ores
Ball mills are common grinding equipment in mineral processing industries. Ball wear results from three mechanisms namely impact, abrasion and corrosion. Of these, the corrosion mechanism is the least investigated, due to its chemical-electrochemical nature. Therefore, the aims of this research were to investigate the grinding chemistry influence (slurry pH, solid percentage, water chemistry an...
متن کامل