The Mechanical Properties of Plasma Nitrided Layers
نویسندگان
چکیده
The article deals with mechanical properties of layers which were created by plasma nitriding technology. Nitrided layers apply to steel AISI 4140 were evaluated by metallographic method, GDOES method, microanalysis method and microhardness method. The trend of mechanical properties was experimentally obtained in dependence on length of cavity during plasma nitriding process. Moreover, the influence of nitrogen content on microhardness and Nht thickness of nitrided layer was proved.
منابع مشابه
INVESTIGATION NITRIDE LAYERS AND PROPERTIES SURFACES ON PULSED PLASMA NITRIDED HOT WORKING STEEL AISI H13
Nitriding is a surface treatment technique used to introduce nitrogen into metallic materials to improve their surface hardness, mechanical properties, wear resistance and corrosion resistance. In this research, the effects of plasma nitriding parameters including frequency and duty cycle were investigated on samples with different grooves dimensions. Steel blocks prepared from DIN1.2344 hot wo...
متن کاملEffect of Gas Mixture H2-N2 on Microstructure and Microhardness of Steel 32CDV13 Nitrided by Plasma
Nitriding treatments of low alloyed steels can be performed only at relatively low temperatures in order to avoid a decrease of corrosion resistance due to nitride layers formation. These conditions promote the formation of the compound layer and diffusion zone, which shows high hardness and good corrosion resistance. In the present paper, the influence of the gas mixture N2-H2 in plasma nitrid...
متن کاملSTUDY ON CORROSION PROPERTIES OF PLASMA NITRIDED PURE ALUMINIUM
Abstract: In this research plasma nitriding of pure aluminium and effect of iron elemental alloy on the formation and growth of aluminium nitride was investigated. Also corrosion properties of formed AlN were investigated. After preparation, the samples were plasma nitrided at 550oC, for 6, 9 and 12 h and a gas mixture of 25%H2-75%N2. The microstructure and phases analysis were investigated usi...
متن کاملINFLUENCE OF SURFACE NANO/ULTRAFINE STRUCTURE ACHIEVED BY DEEP ROLLING PROCESS ON PLASMA NITRIDING AND TRIBOLOGICAL PROPERTIES OF THE AISI 316L STAINLESS STEEL
Influence of formation of surface nano/ultrafine structure using deep rolling on plasma nitriding and tribological properties of the AISI 316L stainless steel was investigated. Initially, the deep rolling process was carried out on the bar-shaped specimens at 15 cycles with 0.2 mm/s longitudinal rate and 22.4 rpm bar rotation. Then, plasma nitriding treatment was applied on the as-received...
متن کاملAn investigation on the passivation behavior of nitrogen enriched AISI 316L austenitic stainless steel
In the present work the effects of plasma nitridization on the passivation behavior of AISI 316L was investigated. To do this; nitriding treatments were carried out at 420°C for 1, 2, 4 and 16 hours. The phase composition and structure of the nitrided layer were studied by Low Angle X-ray diffraction and Scanning Electron Microscopy. The hardness of samples also was evaluated by Vickers microha...
متن کامل