PSFC/RR-99-1 Multipole Magnets Using Monolithic High Temperature Superconductor Materials: I Quadrupoles
نویسندگان
چکیده
The use of monolithic high temperature superconductors in multipole configurations is analyzed in this paper. The properties of monolithic high temperature superconductors have been well documented, and monolithic tubes, disks and rods of different cross section and sizes can presently be obtained from several commercial vendors. In this paper, design issues of quadrupole magnets using single crystal or highly textured YBCO monoliths are addressed. The excellent properties of YBCO operating at elevated temperatures (> 10 K) are also summarized. High field, cryo-stable, highly complex multipole magnets can be manufactured in the proposed manner. The charging schemes for the disks, based upon induction, are also addressed.
منابع مشابه
PSFC/JA-99-13 Options for the Use of High Temperature Superconductor in Tokamak Fusion Reactor Designs
The application of high temperature superconductors in long term tokamak fusion reactors is analyzed in this paper. Properties of high temperature superconductors have been well documented that make them ideal for this application. Short-sample BSSCO wires and YBCO tapes approach their single-crystal performance limits. This provides a useful reference frame as well as a starting point of what ...
متن کاملSlac- Pub-2045 November 1977 (i/a) the Pep Main Ring Magnet System*
The PEP main ring magnet system consists of 192 bending magnets, 216 quadrupoles, 206 sextupoles and numerous other correction elements. The main ring bend magnets are laminated “C” frame dipoles having a very uniform flat field meeting a new criterion of symmetry called the residual asymmetry factor (RAF5 10m5). The main ring quadrupoles consist of 216 laminated magnets of three differing leng...
متن کاملPSFC/JA-03-02 Superconducting options for final optics magnets for the Heavy Ion Driver in Inertial Fusion Energy
The environment close to the chamber in inertial fusion confinement imposes severe constrains on magnets used for final focusing magnets needed for the heavy ion driver. Space is at a premium, requiring close proximity of adjacent magnets, making magnet integration imperative. In addition, the high radiation flux and heating rate imposes requirements that are as stringent as in magnetic fusion....
متن کاملHigh Temperature Superconducting Magnet Control Actuators for the NGST
Executive Summary In this program, the use of high temperature superconducting monoliths for drivers for actuators was investigated. The properties of commercially available bulk YBCO and BSCCO monoliths were measured, and compared with those obtained in laboratory samples. The monoliths were charged, and the capability of holding field was determined. It was found that the properties of commer...
متن کاملLs-133 Specification of 11utipole Toleraces for Th Aps Quadrupole Magnet
This note will address a proposed method for specifying the multipole tolerance for the design and production of APS quadrupole magnets. The tolerances for the multipole components for the quadrupole magnets will be set to that level which reduces the dynamic aperture by about 10-15% from the ideal machine dynamic aperture (as specified in CDR-87). This level may appear rather stringent, especi...
متن کامل