electron transistors fabricated with sidewall spacer patterning
نویسندگان
چکیده
منابع مشابه
Characterization and Design Consideration of 80-nm Self-Aligned N-/P-Channel I-MOS Devices
80-nm self-aligned nand p-channel I-MOS devices were demonstrated by using a novel fabrication method featuring double sidewall spacer, elevated drain structure and RTA process. The fabricated devices showed a normal transistor operation with extremely small subthreshold swing less than 12.2 mV/dec at room temperature. The nand p-channel I-MOS devices had an ON/OFF current of 394.1/0.3 μA and 3...
متن کاملMesa - Sidewall Gate Leakage in InAlAs / InGaAs Heterostructure Field - Effect Transistors
InAIAslInGaAs HFET’s fabricated by conventional mesa isolation have a potential parasitic gate-leakage path where the gate metallization overlaps the exposed channel edge at the mesa sidewall. We have unmistakably proven the existence of this path by fabricating special heterojunction diodes with different mesa-sidewall gate-metal overlap lengths. We find that sidewall leakage is a function of ...
متن کاملSidewall GaAs tunnel junctions fabricated using molecular layer epitaxy.
In this article we review the fundamental properties and applications of sidewall GaAs tunnel junctions. Heavily impurity-doped GaAs epitaxial layers were prepared using molecular layer epitaxy (MLE), in which intermittent injections of precursors in ultrahigh vacuum were applied, and sidewall tunnel junctions were fabricated using a combination of device mesa wet etching of the GaAs MLE layer ...
متن کاملReduction of Parasitic Capacitance in Vertical MOSFETs by Spacer Local Oxidation
Application of double gate or surround-gate vertical metal oxide semiconductor field effect transistors (MOSFETs) is hindered by the parasitic overlap capacitance associated with their layout, which is considerably larger than for a lateral MOSFET on the same technology node. A simple self-aligned process has been developed to reduce the parasitic overlap capacitance in vertical MOSFETs using n...
متن کاملAnalysis of higher order pitch division for sub-32nm lithography
The three knobs of optical lithography, namely process factor k1, wavelength (λ) and numerical aperture (NA) have been constantly pushed to print smaller features. To get an equivalent k1 value below the fundamental limit of 0.25, double patterning (DP) has recently emerged as a viable solution for the 32nm lithography node. Various DP techniques exist such as litho-etch-litho-etch (LELE), lith...
متن کامل