Improving Principle Design of Rectangular SRR Based Metamaterial Structure with Negative μ and ε for Characteristics of Rectangular Microstrip Patch Antenna
نویسندگان
چکیده
This work is mainly focused on improving the principle characteristics of RMPA. Here design of rectangular SRR based metamaterial structure is proposed, which has been superimposed on RMPA at a height of 3.2mm from its ground plane. The resonating frequency of the proposed antenna is 1.896GHz. Simulation results are suggested that the impedance bandwidth of RMPA with proposed metamaterial structure is improved by 20.9MHz and return loss is reduced by 33.83dB. For proving double negative properties (Negative Permeability and Permittivity) of proposed metamaterial structure within the operating frequency range, Nicolson-Ross-Weir method (NRW) has been employed. All the Simulation results have been obtained by using CST-MWS Software. KeywordsRectangular Microstrip Patch Antenna (RMPA); Impedance Bandwidth; Return Loss; Nicolson-Ross-Weir (NRW); Split Ring Resonator (SRR)
منابع مشابه
A High Gain Rectangular Microstrip Patch Antenna Using “Different C Patterns” Metamaterial Design in L-Band
Design of rectangular microstrip patch antenna loaded with “different C patterns” left-handed metamaterial structure has been proposed. The proposed metamaterial structure is designed at a height of 3.2 mm from the ground plane for L-band (1 GHz-2 GHz) applications. The most interesting feature of the design is the ability of enhancing the gain and total efficiency of the antenna without effect...
متن کاملMicrostrip Antenna’s Gain Enhancement Us- Ing Left-handed Metamaterial Structure
Abstract—The design, simulation and fabrication of a left-handed metamaterial (LHM) structure is presented. The combination of the modified square rectangular Split Ring Resonator (SRR) and the Capacitance Loaded Strip (CLS) were used to obtain the negative value of permeability, μ and the negative permittivity, ε. NicolsonRoss-Wier approach was used to identify the double negative region. A go...
متن کاملMicrostrip Antenna Gain Enhancement using Near Zero Refractive Index Metamaterials
Some useful features of microstrip patch antennas are low profile, low weight and easy fabrication. However this type of antenna suffers from having a low gain, caused by propagation surface waves. In this paper, a new near zero refractive index metamaterial (MTM) unit cell is designed and fabricated as a superstrate over a Rectangular Microstrip Patch Antennas (RMPA). In order to obtain a maxi...
متن کاملModified Rectangular Patch Antenna Loaded With Multiple C Slots for Multiple Applications
A new multiple C-slotted microstrip patch antenna is proposed in the present study. A patch antenna is a wide-beam narrowband antenna. The microstrip patch antenna consists of a very thin metallic strip (patch) placed a small fraction of a wavelength above a ground plane. The patch can be designed in any possible shape and normally made of conducting materials such as copper or gold. This study...
متن کاملA Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE)
In this paper a microstrip antenna on a suspended substrate with capacitive feed is presented. capacitive feed is created by a slot within the rectangular patch around the feed point. The proposed antenna exhibits a much higher impedance bandwidth of about 47% (S11 < −10 dB). Effects of key design parameters such as the air gap between the substrate and the ground plane, the gap width between r...
متن کامل