Lithium–tellurium batteries based on tellurium/ porous carbon composite
نویسندگان
چکیده
For the first time, lithiation/delithiation behavior of tellurium at room temperature was investigated using tellurium/porous carbon (Te/C) composite electrodes. The Te/C composite is synthesized by the infusion of liquid tellurium into a porous carbon host at the high temperature of 600 C under vacuum. Owing to the physical confinement of Te by porous carbon matrix, the Te/C electrode is capable of delivering a reversible volumetric capacity as high as 1400 mAh cm 3 (224 mAh g ) at 312 mA cm 3 (50 mA g ) current and maintains 87% of its initial capacity after 1000 cycles. Even when the current increases to 12480 mA cm 3 (2000 mA g ), the Te/C electrode can still provide a volumetric capacity of 500 mAh cm . The high volumetric capacity, long cycle life and good rate capability make Te/C composite a promising electrode for Li-ion batteries.
منابع مشابه
A Fe/Fe3O4/N-carbon composite with hierarchical porous structure and in situ formed N-doped graphene-like layers for high-performance lithium ion batteries.
A Fe/Fe3O4/N-carbon composite consisting of a porous carbon matrix containing a highly conductive N-doped graphene-like network and Fe/Fe3O4 nanoparticles was prepared. The porous carbon has a hierarchical structure which is inherited from rice husk and the N-doped graphene-like network formed in situ. When used as an anode material for lithium batteries, the composite delivered a reversible ca...
متن کاملA porous LiFePO4 and carbon nanotube composite.
A novel composite electrode structure with highly-conductive 3D nanotube networks superimposed into interlaced porous LiFePO(4) media was designed and realized via an in situ sol-gel process, yielding a high-performance multidimensional composite cathode for high-energy and high-power lithium-ion batteries.
متن کاملSynthesis of Hard Carbon- Silicon Nanocomposite as Anode Active Material for Lithium-Ion Batteries
In this research, using phenolic resin as the precursor of carbon and various amounts of ethylene glycol as a pore former, porous samples of hard carbon were synthesized. Samples were characterized by x-ray diffraction (XRD) and N2 adsorption-desorption methods. Broad diffraction peaks represent the amorphous structure of samples. Moreover, the gas adsorption-desorption curves showed that the a...
متن کاملThe superior cycle and rate performance of a novel sulfur cathode by immobilizing sulfur into porous N-doped carbon microspheres.
A novel composite of sulfur immobilized into porous N-doped carbon microspheres (NCMSs-S) was synthesized. This composite cathode for lithium-sulfur batteries delivers a high specific capacity and superior rate capability and cycle stability, with a reversible capacity of ~605 mA h g(-1) at 2 C and 85% capacity retention after 500 cycles.
متن کاملIn situ synthesis of SnO2 nanoparticles encapsulated in micro/mesoporous carbon foam as a high-performance anode material for lithium ion batteries
State Key Laboratory of Silicon Materials, K Application for Batteries of Zhejiang Provin Engineering, Zhejiang University, Hangzhou edu.cn; Fax: +86 571 87951152; Tel: +86 57 Department of Chemical and Biomolecula College Park, MD 20742, USA. E-mail: cswa † Electronic supplementary information (TGA) prole of the SnO2@C porous com porous composite aer being ultrasoni galvanostatic charge–disc...
متن کامل