The Analysis of Ac-dc Boost Pfc Converter Based on Peak and Hysteresis Current Control Techniques
نویسندگان
چکیده
This paper presents two current control techniques of an ac-dc boost converter to obtain unity power factor (PF). Single phase high power factor rectification is the most frequently accomplished using a boost converter. This converter reshapes distorted input current waveform to approximate a sinusoidal current that is in phase with the input voltage. There are several current control techniques for achieving a sinusoidal input current waveform with low distortion. Two typical techniques for power factor correction (PFC) are peak current mode control (PCMC) and hysteresis current mode control (HCMC). These control techniques are evaluated based on control strategy, circuit components, and total harmonic distortion of input current. The single phase ac-dc boost converter is operated in continuous conduction mode (CCM). Both control techniques are simulated in Matlab/Simulink program.
منابع مشابه
Boost Converter for Power Factor Correction of DC Motor Drive
With the increasing demand for power from the ac line and more stringent limits for power quality, power factor correction has gained great attention in recent years. A variety of circuit topologies and control methods have been developed for the PFC application. While the discontinuous conduction mode (DCM) converters such as boost and flyback converters are well suited for low power applicati...
متن کاملPerformance of Three Level Integrated AC-DC Converter with Hysteresis Current Control
In this paper, Performance of three-level integrated ac–dc converter with Hysteresis Current Control Technique is presented. The proposed converter combines with the operation of the boost power factor correction and the three-level dc–dc converter. By the implementation of Hysteresis Current controller, the switching sequence is under controlled condition and the output voltage of the proposed...
متن کاملA New Structure of Buck-Boost Z-Source Converter Based on Z-H Converter
In this paper, a new structure for buck-boost Z-source converter based on Z-H topology is proposed. The proposed converter consists of two LC networks similar to the conventional Z-source and Z-H converters. One of the characteristics of the proposed structure is that, without any changing in its’ power circuit, it can be used in different conversions such as dc/dc, dc/ac and ac/ac. This unique...
متن کاملتحلیل و طراحی روش کنترل پیش بین برای یکسو کننده دارای اصلاح ضریب توان با مبدل ارتقاء یافتهء شپارد- تیلور
In this paper CCM/CVM operation and modeling of the improved Sheppard-Taylor based power factor correction (PFC) rectifier is presented and a predictive control strategy is introduced for this rectifier. Compared with conventional boost or buck–boost PFC’s, this topology allows a better current tracking at the AC side, with a relatively reduced voltage at the DC side. Consequently, ...
متن کاملPower Factor Correction Using Step-Up Chopper Fed to a DC Motor Drive
With the expanding interest for power from the ac line and more stringent cutoff points for power quality, power factor correction is extraordinary consideration as of late. An assortment of circuit topologies and control strategies has been created for the PFC application. While the discontinuous conduction mode (DCM) converters for example, boost and fly back converters are appropriate for lo...
متن کامل