A Novel Vapor Injection Structure on the Blade for Rotary Compressor
نویسندگان
چکیده
Heat pumps with rotary compressors operating in low temperature ambient will face heavy performance degradation. A novel vapor injection structure on the blade for the rotary compressor has been proposed in this paper to overcome the back-flowing drawback of the traditional cylinder injection structure and enlarge the injection area. Based on a verified numerical model, the performance of a rotary compressor with the blade injection structure has been investigated. The results indicate that: the proposed vapor injection structure can eliminate the back-flowing of the injected refrigerant; compared to the traditional injection structure, the new structure can enhance the volumetric efficiency and injection mass flow-rate by 1.8~2.7% and 26.6~57.2%, respectively; and compared to the traditional injection structure, the new structure can increase the heating capacity and COP by 23.1~48.9% and 3.2~8.0%, respectively.
منابع مشابه
Vibration Analysis of Rotary Compressors
By theoretically analyzing dynamic behavior of the crankshaft, the rolling piston and the blade inrolling-piston rotary compressors, constraint forces and sliding speed at each pair of movable machine elements were obtained, and unbalanced inertia forces and compressor vibrations were evaluated. It was concluded that theoretical results have a goodagreement with experimental ones. Moreover, it ...
متن کاملEffect of aging and manufacturing tolerances on multi-stage transonic axial compressor performance
The Axial compressor is an integrated part of a gas turbine. The central part of compressors is its blades. Blade aerodynamic has a significant effect on compressor performance. Because of the adverse pressure gradient in the compressor, any deviation in the blade profile has a significant influence on the flow field as well as the compressor performance. During the manufacturing and operation ...
متن کاملDevelopment of a Novel Structure Rotary Compressor for Separate Sensible and Latent Cooling Air-Conditioning System
The energy efficiency of separate sensible and latent cooling (SSLC) airconditioning system is higher than traditional one, since SSLC system uses separate cycles which can raise the evaporating temperature of sensible cycle. Separate cycles often include two separate compressors, which makes the initial investment of SSLC cycle too expensive to use in room air conditioning. A novel structure r...
متن کاملPresenting Three Design Methods for Axial Compressor Blade via Optimization
Improving the efficiency of compressors has been one of the most important goals of researchers over the years. In this paper, three different methods are presented for parameterization and blade optimization of axial flow compressor. All methods consist of flow analysis tool, optimization algorithms, and parametric geometry generation tool, that are different in each approach. Objective functi...
متن کاملEffect of blade profile on the performance characteristics of axial compressor in design condition
The choice of geometrical shape of the blades has a considerable effect on aerodynamic performance and flow characteristics in axial compressors. In this paper, the effects of the blades shape on the aerodynamic design characteristics are investigated based on Streamline Curvature Method (SCM). Initially, the Streamline Curvature Method (SCM) is used for designing a two-stage axial compressor. ...
متن کامل