Model of fatigue damage in strain-rate-sensitive composite materials
نویسندگان
چکیده
منابع مشابه
مدلسازی عددی نفوذ پرسرعت در چندلایه های بافته شده با درنظرگیری اثرات نرخ کرنش در تخریب پیش رونده
In this research, progressive damage of woven composite materials due to high velocity impact is investigated via finite elements method. Necessity of impact analysis of composite materials using progressive damage method is detailed and available material models for this type of analysis is discussed. Governing equations at onset of failure and failure modes as well as damage growth is express...
متن کاملModeling the strain-rate dependence of fatigue life of hot- pressed silicon nitride
This paper presents the results of a micromechanical model used to explain the strain-rate dependence of the compression fatigue lives of amorphous and crystalline grain boundary phase; denoted by ABP and CBP silicon nitrides, respectively. When the strain-rate is changed from 400 to 0.01/s, the fatigue lives of both materials, evaluated at a peak stress of 3.2 GPa, increased by more than two o...
متن کاملEnergy-Based Prediction of Low-Cycle Fatigue Life of CK45 Steel and SS316 Stainless Steel
In this paper, low cycle fatigue life of CK45 steel and SS316 stainless steel under strain-controlled loading are experimentally investigated. In addition, the impact of mean strain and strain amplitude on the fatigue life and cyclic behavior of the materials are studied. Furthermore, it is attempted to predict fatigue life using energy and SWT damage parameters. The experimental results demons...
متن کاملFinite element analysis of fatigue damage in passenger-car diesel engine cylinder head under cyclic thermo-mechanical loadings
In this article, the thermo-mechanical fatigue lifetime of the cylinder head of a passenger-car diesel engine has been estimated. At the first stage, stress and strain distributions in the cylinder head have been calculated using the two-layer visco-plastic model, available in the ABAQUS software. The calibration of the model was performed, using correlating of simulated hysteresis curves and l...
متن کاملBending analysis of composite sandwich plates using generalized differential quadrature method based on FSDT
Nowadays, the technology intends to use materials such as magnesium alloys due to their high strength to weight ratio in engine components. As usual, engine cylinder heads and blocks has made of various types of cast irons and aluminum alloys. However, magnesium alloys has physical and mechanical properties near to aluminum alloys and reduce the weight up to 40 percents. In this article, a new ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2003