Strain induced irreversible critical current degradation in highly dense Bi - 2212 round wire

نویسندگان

  • M. Sugano
  • J. Hudspeth
  • M. Di Michiel
چکیده

The strain induced critical current degradation of overpressure processed straight Bi-2212/Ag wires has been studied at 77 K in self-field. For the first time superconducting properties, lattice distortions, composite wire stress and strain have been measured simultaneously in a high energy synchrotron beamline. A permanent Ic degradation of 5% occurs when the wire strain exceeds 0.60%. At a wire strain of about 0.65% a drastic n-value and Ic reduction occur, and the composite stress and the Bi-2212 lattice parameter reach a plateau, indicating Bi-2212 filament fracturing. The XRD measurements show that Bi-2212 exhibits linear elastic behaviour up to the irreversible strain limit.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Role of internal gases and creep of Ag in controlling the critical current density of Ag-sheathed Bi2Sr2CaCu2Ox wires

High engineering critical current density JE of > 500A/mm 2 at 20T and 4.2K can be regularly achieved in Ag-sheathed multifilamentary Bi2Sr2CaCu2Ox (Bi-2212) round wire when the sample length is several centimeters. However, JE(20T) in Bi-2212 wires of several meters length, as well as longer pieces wound in coils, rarely exceeds 200A/mm. Moreover, long-length wires often exhibit signs of Bi-22...

متن کامل

Evidence for length-dependent wire expansion, filament dedensification and consequent degradation of critical current density in Ag-alloy sheathed Bi-2212 wires

It is well known that longer Bi-2212 conductors have significantly lower critical current density (Jc) than shorter ones, and recently it has become clear that a major cause of this reduction is internal gas pressure generated during heat treatment, which expands the wire diameter and dedensifies the Bi-2212 filaments. Here we report on the length-dependent expansion of 5 to 240 cm lengths of s...

متن کامل

Isotropic round-wire multifilament cuprate superconductor for generation of magnetic fields above 30 T.

Magnets are the principal market for superconductors, but making attractive conductors out of the high-temperature cuprate superconductors (HTSs) has proved difficult because of the presence of high-angle grain boundaries that are generally believed to lower the critical current density, J(c). To minimize such grain boundary obstacles, HTS conductors such as REBa2Cu3O(7-x) and (Bi, Pb)2Sr2Ca2Cu...

متن کامل

Comparison of growth texture in round Bi2212 and flat Bi2223 wires and its relation to high critical current density development

Why Bi(2)Sr(2)CaCu(2)Ox (Bi2212) allows high critical current density Jc in round wires rather than only in the anisotropic tape form demanded by all other high temperature superconductors is important for future magnet applications. Here we compare the local texture of state-of-the-art Bi2212 and Bi2223 ((Bi,Pb)(2)Sr(2)Ca(2)Cu(3)O(10)), finding that round wire Bi2212 generates a dominant a-axi...

متن کامل

Bi - 2212 r Ag tapes melt - grown under an elevated magnetic field ž / 0 – 10 T

Bi-2212rAg tapes with a thickness of 30 mm were melt-grown in elevated magnetic fields following two different thermal sequences. The transport critical current density, J dependence on the maximum processing temperature, cooling c rate, holding time and magnetic field was studied systematically. The quantity of impurity phase was decreased by reducing the holding time above the melting point o...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015