Experiments on a Blunt Cone Model in a Hypersonic Shock Tunnel
نویسنده
چکیده
The experimental investigation on a 60 apex-angle is carried out to study feasibility of simultaneous measurement of drag and aerodynamic heating in a shock tunnel. A three-component accelerometer balance system is used to measure the drag whereas platinum thin film gauges are used for heating rate measurements on the surface of the blunt cone model. Since every ground test and flight test data have unique test conditions, so the importance of simultaneous measurement is realized by measuring both drag and heating rates under unique test conditions during gas injection at the nose of a blunt cone model flying at Mach 5.75, in a IISc hypersonic shock tunnel (HST2). In addition, flow visualization experiments are also conducted on the blunt cone model using electric discharge technique.
منابع مشابه
Analytic Solution for Hypersonic Flow Past a Slender Elliptic Cone Using Second-Order Perturbation Approximations
An approximate analytical solution is obtained for hypersonic flow past a slender elliptic cone using second-order perturbation techniques in spherical coordinate systems. The analysis is based on perturbations of hypersonic flow past a circular cone aligned with the free stream, the perturbations stemming from the small cross-section eccentricity. By means of hypersonic approximations for the ...
متن کاملLaminar and Turbulent Aero Heating Predictions over Blunt Body in Hypersonic Flow
In the present work, an engineering method is developed to predict laminar and turbulent heating-rate solutions for blunt reentry spacecraft at hypersonic conditions. The calculation of aerodynamic heating around blunt bodies requires alternative solution of inviscid flow field around the hypersonic bodies. In this paper, the procedure is of an inverse nature, that is, a shock wave is assumed a...
متن کاملApproximate Viscous Shock-Layer Analysis of Axisymmetric Bodies in Perfect Gas Hypersonic Flow
In this paper, an approximate axisymmetric method is developed which can reliably calculate fully viscous hypersonic flow over blunt-nosed bodies. In this method, a Maslen’s second-order pressure expression is used instead of the normal momentum equation. The combination of Maslen’s second-order pressure expression and viscous shock layer equations is developed to accurately and efficiently com...
متن کاملCFD Validation for Hypersonic Flight: Real Gas Flows
The aerodynamics of future hypersonic air-breathing vehicles will be greatly affected by high-enthalpy or “real gas” effects. It is the purpose of a recent NATO Research and Technology Organization study to assess the readiness of computational fluid dynamics to simulate high-enthalpy flows. This paper summarizes the results of this effort through the discussion of four test cases: a transverse...
متن کاملReal-Gas and Surface-Ablation Effects on Hypersonic Boundary-Layer Instability over a Blunt Cone
There has been little research into surface-ablation effects on hypersonic boundary-layer instability, and the current understanding of real-gas effects on hypersonic boundary-layer instability still contains uncertainties. The objective of the current work was to analyze the hypersonic boundary-layer transition process using linear-stability theory, inwhich surface ablation, aswell as real-gas...
متن کامل