Protection route Mechanism for Survivability in FTTH-PON Network
نویسندگان
چکیده
This paper described the proposed protection route mechanism and simulation of protection mechanism model in order to achieve survivability in PON-FTTH. Due to large transport capacity achieved by the network, failures which occur cause huge losses of data and greatly influence upon a large number of users over a wide area. Therefore, the survivability of the whole network has to be examined more seriously. Then the smart and intelligent system of FTTH is expected to be a key element which provides centralized monitoring, survivability and instantly maintenance of FTTH customer access network.
منابع مشابه
Hitless Protection Switching Method for Passive Optical Network
The Passive Optical Network (PON) shares transmission facilities to provide broadband services economically. To enhance network survivability, ITU-T Rec. G.983.5 defines some protection switching methods. These methods, however, always bring about signal loss when switching is performed. Moreover, a network operator often has to replace one optical fiber cable with another that takes a differen...
متن کاملSurveillance and Protection-Based Approach for Link Failures over Fiber-to the-Home (FTTH) with Combination of ACS and SANTAD
This paper introduces an in-service transmission surveillance and protection-based approach for fiber failures/faults over fiber-to-the-home passive optical network (FTTH-PON) with an excellent combination of Access Control System (ACS) and Smart Access Network Testing, Analyzing and Database (SANTAD). Our hardware design works on a standard local area network (LAN) using a specially designed h...
متن کاملOn The Evolution of PON-Based FTTH Solutions
Passive Optical Network (PON)-based Fiber-To-The-Home (FTTH) is a promising solution that can break through the economic barrier of traditional point-to-point solutions. Once fibers are deployed with PON-based FTTH solutions, it becomes critical how to migrate to Wavelength Division Multiplexing (WDM)-PON because Time Division Multiplexing (TDM) used in current PON solutions cannot exploit the ...
متن کاملProtection for Tree-Based EPON-FTTH Architecture Using Combination ACS and OXADM
s: Ethernet Passive Optical Network (EPON) was proposed to overcome the bandwidth bottleneck at the Access Network due to its simplicity, cost effectiveness and wide spread deployment. A failure in access networks can cause serious problem, because access network transmit aggregated high-speed traffic from hundreds of subscribers. Protection and restoration mechanisms have been applied in backb...
متن کاملNext Generation Optical Access Network: Standardization Outline and Key Technologies for Co-existence with Legacy Systems
Users are increasingly demanding broadband services, and fiber-to-the-home (FTTH) is the main technology to answer these demands. Gigabit-class passive optical network (PON) systems, IEEE802.3ah GE-PON [1] or ITU-T G.984 G-PON [2] have been widely deployed and used by many network operators. The number of FTTH users in Asia is increasing and has exceeded 30 million [3]. Especially in Japan the ...
متن کامل