Comparison between Empirical Correlation and Computational Fluid Dynamics Simulation for the Pressure Gradient of Multiphase Flow
نویسندگان
چکیده
The objective of this research is to compare the use of empirical correlation with Computational Fluid Dynamics (CFD) simulation in determining the pressure gradient in two-phase flow pipelines at the same inlet condition. In this work, the empirical model of Beggs and Brill model had been used whereas the turbulent model applied in the CFD simulation was the Renormalization Group (RNG) k-ε model. A statistical analysis was conducted to determine the deviation in the values obtained by the CFD simulation as compared to those from the empirical correlation. It was found that the CFD results were in a good agreement with the findings obtained from the empirical correlation with a deviation of less than ±5%. Index Terms empirical correlation, Computational Fluid Dynamics, pressure gradients, two-phase flow
منابع مشابه
Multiphase flow and tromp curve simulation of dense medium cyclones using Computational Fluid Dynamics
Dense Medium Cyclone is a high capacity device that is widely used in coal preparation. It is simple in design but the swirling turbulent flow, the presence of medium and coal with different density and size fraction and the presence of the air-core make the flow pattern in DMCs complex. In this article the flow pattern simulation of DMC is performed with computational fluid dynamics and Fluent...
متن کاملCFD Simulation of Dry and Wet Pressure Drops and Flow Pattern in Catalytic Structured Packings
Type of packings and characteristics of their geometry can affect the flow behavior in the reactive distillation columns. KATAPAK SP is one the newest modular catalytic structured packings (MCSP) that has been used in the reactive distillation columns, recently. However, there is not any study on the hydrodynamics of this packing by using computational fluid dynamics. In the present work, a 3D ...
متن کاملAnalytical and comparative investigations on counter flow heat exchanger using computational fluid dynamics
This paper presents a comprehensive and exclusive thermodynamic analysis of counter flow heat exchanger under various operating and geometrical conditions. Analysis system (ANSYS) workbench 14.0 has been used for computational analysis and comparison with previous literature has been carried out in view of variable temperature and mass flow rate of hot and cold fluids. An analytical and statist...
متن کاملA CFD Simulation of the Parameters Affecting the Performance of Downhole De-oiling Hydrocyclone
Among the all parameters affecting the performance of a downhole de-oiling hydrocyclone, the investigation of internal flow field deserves more attempts especially in the petroleum industry. In this study, the effects of inlet flow rate, inlet oil volume fraction, and oil droplet diameter on the separation efficiency and pressure drop ratio have been investigated along the hydrocyclone body. Al...
متن کاملCFD Simulation of Gas-Solid Two-Phase Flow in Pneumatic Conveying of Wheat
Computational Fluid Dynamics (CFD) simulations of gas-solid flow through a positive low-pressure pneumatic conveyor were performed using Eulerian-Eulerian framework. Pressure drop in pneumatic conveying pipelines, creation and destruction of plugs along the horizontal and vertical pipes, effect of 90° elbows and U-bends on cross-section concentrations, and rope formation and dispersion were...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2008