Recent Advances in Spray Combustion: Spray Combustion Measurements and Model Simulation
نویسندگان
چکیده
the copyright owner is unlawful. The code following this statement indicates the copyright owner's consent that copies of articles in this volume may be made for personal or internal use, on condition that the copier pay the per-copy fee ($2.00) plus the per-page fee ($0.50) through the Data and information appearing in this book are for informational purposes only. AIAA is not responsible for any injury or damage resulting from use or reliance, nor does AIAA warrant that use or reliance will be free from privately owned rights.
منابع مشابه
Studies on Soot Formation and Combustion in Turbulent Spray Flames: Modeling and Experimental Measurement
The present study is concerned with measuring and simulating soot formation and combustion in turbulent liquid fuel spray flames. Soot concentrations inside the combustor are measured by filter paper technique. The simulation is based on the solution of the fully-coupled conservation equations for turbulent flow, chemical species kinetic modeling, fuel droplet evaporation and combustion and...
متن کاملAccurate Simulation of Low-Pressure Port Fuel and Water Spray in Internal Combustion Engines; Numerical and Experimental Study
One of the solutions to reduce pollutants and increase engine power is to use water spray in internal combustion engines. In this type of engine, fuel and water sprays play an important role in engine performance. In this regard, the purpose of this study is to accurately simulate fuel and water sprays and provide optimal coefficients to achieve the best simulation results. For this purpose, th...
متن کاملDirect numerical simulation of three-dimensional swirling n-heptane spray flames
Spray combustion is encountered in many engineering applications, such as internal combustion engines and gas-turbine aircraft engines. In these systems, the concurrent processes of liquid atomization, droplet evaporation, turbulent dispersion, and combustion interact and strongly affect each other, which makes experimental measurement and high-fidelity simulation challenging. To understand the...
متن کاملEffects of primary breakup modeling on spray and combustion characteristics of compression ignition engines
0010-2180/$ see front matter 2010 The Combust doi:10.1016/j.combustflame.2010.02.018 * Corresponding author. Address: University of Illin Mechanical & Industrial Engineering, 842 West Tayl 7022, USA. Fax: +1 312 413 0441. E-mail address: [email protected] (S.K. Aggarwal). Injector flow dynamics and primary breakup processes are known to play a pivotal role in determining combustion and emissions in d...
متن کاملInternal combustion engines in cylinder flow simulation improvement using nonlinear k-ε turbulence models
The purpose of this paper is to studying nonlinear k-ε turbulence models and its advantages in internal combustion engines, since the standard k-ε model is incapable of representing the anisotropy of turbulence intensities and fails to express the Reynolds stresses adequately in rotating flows. Therefore, this model is not only incapable of expressing the anisotropy of turbulence in an engine c...
متن کامل