Forward Body Biasing Technique in Current Folded CMOS LNA in Subthreshold Region for Biomedical Applications
نویسندگان
چکیده
A CMOS low noise amplifier with current folded technique has been proposed for ultra-low voltage, ultra-low power biomedical applications. The target frequency is 2.4 GHz and the proposed LNA is implemented in standard 65 and 90 nm CMOS technologies. By exploiting forward body biasing technique in current folded architecture, the LNA is biased in subthreshold region with supply voltage of 350 m V and DC current consumption of 503 uA. The LNA achieves power gain S21 of 10 dB, noise figure NF of 1.7 dB, IIP3 and P1dB of -8 dB, -18 dB respectively.
منابع مشابه
An Ultra-low Power Robust Kogge- Stone Adder at Sub-threshold Voltages for Implantable Bio-medical Devices
The growing demand for energy constrained applications and portable devices have created a dire need for ultra-low power circuits. Implantable biomedical devices such as pacemakers need ultra-low power circuits for a better battery life for uninterrupted biomedical data processing. Circuits operating in subthreshold region minimize the energy per operation, thus providing a better platform for ...
متن کاملRF CMOS LNA Using Feed-forward Noise and Distortion Cancellation Topology
An elegant CMOS LNA design using feed-forward noise and distortion cancellation technique is presented in this paper. The design is implemented in 130nm CMOS technology. In comparison to other conventional technique the proposed LNA shows improvement in performance parameter such as NF, gain, stability and power dissipation. . In this paper a CMOS inverter along with resistive negative feedback...
متن کاملThe Effect of DTMOS Transistors on the Performance of a Memristor-based Ternary CAM Cell in Low Power Applications
This paper proposes the use of DTMOS transistors in a memristor-based ternary CAM (MTCAM) instead of MOSFET transistors. It also evaluates the effect of forward body biasing methods in DTMOS transistors on the performance of a MTCAM cell in write mode. These biasing methods are gate-to-body tying (called DT1), drain-to-body tying (called DT2), and gate-to-body tying with a voltage supply of 0.1...
متن کاملA 0.4V 790μw CMOS low noise amplifier in sub-threshold region at 1.5GHz
A fully integrated low-noise amplifier (LNA) with 0.4V supply voltage and ultra-low power consumption at 1.5GHz by folded cascode structure is presented. The proposed LNA is designed in a TSMC 0.18 μm CMOS technology, in which the all transistors are biased in sub-threshold region. Through the use of the proposed circuit for the gain enhancement in this structure and using forward body bias tec...
متن کاملNovel Oscillators in Subthreshold Regime
In this paper, the implementation of oscillators in the subthreshold region is proposed. The ring and coupled ring oscillators are implemented. The techniques of swapped body biasing (SBB) and Dynamic threshold Voltage MOSFET (DTMOS) biasing are introduced for performance improvement of coupled ring oscillators. The functionality of the oscillators in subthreshold region is verified through sim...
متن کامل