Comparison of experimental and numerical simulation results for the 5-10-5 MAX1 antenna
نویسندگان
چکیده
This paper compares numerical simulation results, from CST MWS R ©, with the experimental results published in [1] for the 5-10-5 MAX1 antenna configuration. This comparison is used to validate and establish the accuracy of the simulation software.
منابع مشابه
Numerical Modeling and Experimental Study of Probe-Fed Rectangular Dielectric Resonator Antenna (RDRA) Supported by Finite Circular Ground Plane
Dielectric Resonator Antennas (DRAs) have received increased interest in recent years for their potential applications in microwave and millimeter wave communication systems. DRAs are normally used with the support of a ground plane. The radiation and impedance properties therefore depend not only on their physical dimensions and dielectric properties, but also on the size of the ground plane. ...
متن کاملNumerical simulation of in-cylinder tumble flow field measurements and comparison to experimental results
This paper presents a comparison between measured and predicted results of the in-cylinder tumble flow and the flow coefficient generated by a port-valve-liner assembly on a steady-flow test bench. In this study, computational fluid dynamics (CFD) methods were employed to gain further insight into characteristics of an engine. The purpose was to advance understanding of the stationary turbulenc...
متن کاملCPW-Fed Circularly Polarized Slot ANTENNA with Elliptical-Shaped Patch for UWB Applications
A new design of coplanar waveguide (CPW)-fed antenna with circular polarization (CP) and excellent impedance matching is presented. In this design a pair of circular-shaped slits is applied to opposite corners of the slot for enhancing the impedance matching and realizes bandwidth of 134.43% across 2.98-15.20 GHz for VSWR≤2. Furthermore this structure exhibits axial ration bandwidth (ARBW) of 3...
متن کاملUWB Planar Conical Horn-Shaped Self-Complementary Bow-Tie Antenna
An ultra-wideband (UWB) self-complementary planar bow-tie antenna (SCPBTA) is proposed. The antenna consists of a printed conical horn-shaped (CHS) radiator and a counterpart CHS slot etched on a rectangular ground plane. The printed CHS radiator is connected directly to the 50Ω microstrip line by bending the end portion of the feed line. As a result, the antenna has a simple structure which do...
متن کاملA Novel Compact Ultra-Wideband Antenna with Single and Double Band Rejection
Band-notch characteristic has been of great interest recently to overcome the electromagnetic interference of Ultra-wideband systems (UWB) with other existing ones. In this paper, we present a novel microstrip-fed antenna with band rejection property appropriate for UWB applications. Band-notch characteristic has been achieved by adding a rectangular resonant element to the ground section. A pr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011