Artificial lymphatic drainage systems for vascularized microfluidic scaffolds.

نویسندگان

  • Keith H K Wong
  • James G Truslow
  • Aimal H Khankhel
  • Kelvin L S Chan
  • Joe Tien
چکیده

The formation of a stably perfused microvasculature continues to be a major challenge in tissue engineering. Previous work has suggested the importance of a sufficiently large transmural pressure in maintaining vascular stability and perfusion. Here we show that a system of empty channels that provides a drainage function analogous to that of lymphatic microvasculature in vivo can stabilize vascular adhesion and maintain perfusion rate in dense, hydraulically resistive fibrin scaffolds in vitro. In the absence of drainage, endothelial delamination increased as scaffold density increased from 6 to 30 mg/mL and scaffold hydraulic conductivity decreased by a factor of 20. Single drainage channels exerted only localized vascular stabilization, the extent of which depended on the distance between vessel and drainage as well as scaffold density. Computational modeling of these experiments yielded an estimate of 0.40-1.36 cm H2O for the minimum transmural pressure required for vascular stability. We further designed and constructed fibrin patches (0.8 × 0.9 cm(2)) that were perfused by a parallel array of vessels and drained by an orthogonal array of drainage channels; only with the drainage did the vessels display long-term stability and perfusion. This work underscores the importance of drainage in vascularization, especially when a dense, hydraulically resistive scaffold is used.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Vascularized Tissue Constructs

A major challenge in tissue engineering is the lack of proper vascularization of the fabricated tissue constructs. Microscale technologies, especially microfluidic systems, provide new opportunities to overcome the challenge of developing artificial micro-vasculatures. In this chapter, the application of microfluidic systems for generating vascularized tissue constructs by using microfluidic pl...

متن کامل

Computational design of drainage systems for vascularized scaffolds.

This computational study analyzes how to design a drainage system for porous scaffolds so that the scaffolds can be vascularized and perfused without collapse of the vessel lumens. We postulate that vascular transmural pressure--the difference between lumenal and interstitial pressures--must exceed a threshold value to avoid collapse. Model geometries consisted of hexagonal arrays of open chann...

متن کامل

Design principles for lymphatic drainage of fluid and solutes from collagen scaffolds.

In vivo, tissues are drained of excess fluid and macromolecules by the lymphatic vascular system. How to engineer artificial lymphatics that can provide equivalent drainage in biomaterials remains an open question. This study elucidates design principles for engineered lymphatics, by comparing the rates of removal of fluid and solute through type I collagen gels that contain lymphatic vessels o...

متن کامل

Vascularized groin lymph node transfer using the wrist as a recipient site for management of postmastectomy upper extremity lymphedema.

BACKGROUND Restoring the continuity of lymphatic drainage by lymphaticovenous or lymphaticolymphatic anastomosis was observed in the short term to be patent but eventually occluded because the elevated interstitial pressure will cause obliteration of these tiny, thin-walled, low-pressure lumens. The purpose of this study was to evaluate the outcome of vascularized groin lymph node transfer usin...

متن کامل

Layer-by-layer micromolding of natural biopolymer scaffolds with intrinsic microfluidic networks.

A three-dimensional (3D) microfluidic network plays an important role in engineering thick organs. However, most of the existing methods are limited to mechanically robust synthetic biomaterials and only planar or simple microfluidic networks have been incorporated into soft natural biopolymers. Here we presented an automatic layer-by-layer micromolding strategy to reproducibly fabricate 3D mic...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of biomedical materials research. Part A

دوره 101 8  شماره 

صفحات  -

تاریخ انتشار 2013