Room Temperature Ferromagnetic Mn:Ge(001)
نویسندگان
چکیده
We report the synthesis of a room temperature ferromagnetic Mn-Ge system obtained by simple deposition of manganese on Ge(001), heated at relatively high temperature (starting with 250 °C). The samples were characterized by low energy electron diffraction (LEED), scanning tunneling microscopy (STM), high resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), superconducting quantum interference device (SQUID), and magneto-optical Kerr effect (MOKE). Samples deposited at relatively elevated temperature (350 °C) exhibited the formation of ~5-8 nm diameter Mn₅Ge₃ and Mn11Ge₈ agglomerates by HRTEM, while XPS identified at least two Mn-containing phases: the agglomerates, together with a Ge-rich MnGe~2.5 phase, or manganese diluted into the Ge(001) crystal. LEED revealed the persistence of long range order after a relatively high amount of Mn (100 nm) deposited on the single crystal substrate. STM probed the existence of dimer rows on the surface, slightly elongated as compared with Ge-Ge dimers on Ge(001). The films exhibited a clear ferromagnetism at room temperature, opening the possibility of forming a magnetic phase behind a nearly ideally terminated Ge surface, which could find applications in integration of magnetic functionalities on semiconductor bases. SQUID probed the co-existence of a superparamagnetic phase, with one phase which may be attributed to a diluted magnetic semiconductor. The hypothesis that the room temperature ferromagnetic phase might be the one with manganese diluted into the Ge crystal is formulated and discussed.
منابع مشابه
Room Temperature Ferromagnetic, Anisotropic, Germanium Rich FeGe(001) Alloys
Ferromagnetic FexGe1-x with x = 2%-9% are obtained by Fe deposition onto Ge(001) at high temperatures (500 °C). Low energy electron diffraction (LEED) investigation evidenced the preservation of the (1 × 1) surface structure of Ge(001) with Fe deposition. X-ray photoelectron spectroscopy (XPS) at Ge 3d and Fe 2p core levels evidenced strong Fe diffusion into the Ge substrate and formation of Ge...
متن کاملMonolithic integration of room-temperature multifunctional BaTiO3-CoFe2O4 epitaxial heterostructures on Si(001)
The multifunctional (ferromagnetic and ferroelectric) response at room temperature that is elusive in single phase multiferroic materials can be achieved in a proper combination of ferroelectric perovskites and ferrimagnetic spinel oxides in horizontal heterostructures. In this work, lead-free CoFe2O4/BaTiO3 bilayers are integrated with Si(001) using LaNiO3/CeO2/YSZ as a tri-layer buffer. They ...
متن کاملRobust spin-orbit torque and spin-galvanic effect at the Fe/GaAs (001) interface at room temperature
Interfacial spin-orbit torques (SOTs) enable the manipulation of the magnetization through in-plane charge currents, which has drawn increasing attention for spintronic applications. The search for material systems providing efficient SOTs, has been focused on polycrystalline ferromagnetic metal/non-magnetic metal bilayers. In these systems, currents flowing in the non-magnetic layer generate-d...
متن کاملExposition of semiconducting and ferromagnetic properties of pulsed - laser - deposited thin films of LaFe 1 − x Ni x O 3 „ x = 0 .
We have explored the possibility of ferromagnetic semiconducting property in the epitaxial thin films of LaFe1−xNixO3 x=0.3, 0.4, and 0.5 grown on 001 oriented LaAlO3 substrate. We observe that substitution of Ni in the series leads to the increase in conductivity of the samples with conduction being controlled by the disorder-induced localization of charge carriers. All these samples show ferr...
متن کاملFerromagnetic Nanoparticles: Synthesis, Processing, and Characterization
Ferromagnetic nanoparticles are building blocks of future high density recording media and high performance permanent magnets. However, it is very challenging to produce nanoparticles with ferromagnetism at room temperature. The author describes recent progress in preparing ferromagnetic nanoparticles. Ferromagnetic nanoparticles can be used as building blocks for advanced bulk and thin fi lm m...
متن کامل