How Oscilloscopes Work
ثبت نشده
چکیده
The vertical circuitry controls the vertical axis of the display and consists of an input coupling circuit, the input attenuator, and the vertical amplifier (for dual trace oscilloscopes, there are two identical vertical circuits, one for each channel). All signals connected to the vertical input jacks are fed through at least part of the vertical circuitry before they are used by other oscilloscope circuits.
منابع مشابه
Scanning A/D Converters, Waveform Digitizers, and Oscilloscopes
Scanning A/Ds, waveform digitizers and oscilloscopes all digitize analog signals. In all three instrument types, the purpose is to capture all significant details (i.e., frequency components) of the input waveform so that information can be extracted. These instruments differ in how performance parameters are optimized, the depth of user control over the data acquisition process, and the level ...
متن کاملTerminology for High - Speed Sampling - Oscilloscope Calibration Dylan
We discuss procedures for calibrating high-speed sampling oscilloscopes at the National Institute of Standards and Technology, and the terminology associated with those calibrations. The discussion clarifies not only the calibration procedures, but how to use the calibrations to perform traceable oscilloscope measurements.
متن کاملOptoelectronic time-domain characterization of a 100 GHz sampling oscilloscope
We have performed an optoelectronic measurement of the impulse response of an ultrafast sampling oscilloscope with a nominal bandwidth of 100 GHz within a time window of approximately 100 ps. Our experimental technique also considers frequency components above the cut-off frequency of higher-order modes of the 1.0 mm coaxial line, which is shown to be important for the specification of the impu...
متن کاملDigital Storage Oscilloscopes
The TPS2000B Series offers a distinctive range of capabilities in an oscilloscope with controls and menus you will find familiar and easy to use. Available in 2or 4-channel versions, the TPS2000B Series with IsolatedChannelTM technology provides isolation from ground and isolation between channels allowing you to take measurements with less worry about damaging circuitry. Battery power comes st...
متن کاملDSP in High Performance Oscilloscopes
Abstract: The digital signal processing revolution began around 1980 as the first dedicated digital signal processors began to appear. Since that time DSP has been incorporated into just about every aspect of modern electronics. Oscilloscopes are no exception. Digital storage oscilloscopes have almost totally replaced analog oscilloscopes. They use DSP in acquisition modes, averaging, interpola...
متن کامل