Femtosecond near-field scanning optical microscopy.

نویسندگان

  • B A Nechay
  • U Siegner
  • M Achermann
  • F Morier-Genaud
  • A Schertel
  • U Keller
چکیده

We have developed an instrument for optically measuring carrier dynamics in thin-film materials with approximately 150 nm lateral resolution, approximately 250 fs temporal resolution and high sensitivity. This is accomplished by combining an ultrafast pump-probe laser spectroscopic technique with a near-field scanning optical microscope. A diffraction-limited pump and near-field probe configuration is used, with a novel detection system that allows for either two-colour or degenerate pump and probe photon energies, permitting greater measurement flexibility than that reported in earlier published work. The capabilities of this instrument are proven through near-field degenerate pump-probe studies of carrier dynamics in GaAs/AIGaAs single quantum well samples locally patterned by focused ion beam (FIB) implantation. We find that lateral carrier diffusion across the nanometre-scale FIB pattern plays a significant role in the decay of the excited carriers within approximately 1 microm of the implanted stripes, an effect which could not have been resolved with a far-field system.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

An overview of scanning near-field optical microscopy in characterization of nano-materials

Scanning Near-Field Optical Microscopy (SNOM) is a member of scanning probe microscopes (SPMs) family which enables nanostructure investigation of the surfaces on a wide range of materials. In fact, SNOM combines the SPM technology to the optical microscopy and in this way provide a powerful tool to study nano-structures with very high spatial resolution. In this paper, a qualified overview of ...

متن کامل

An overview of scanning near-field optical microscopy in characterization of nano-materials

Scanning Near-Field Optical Microscopy (SNOM) is a member of scanning probe microscopes (SPMs) family which enables nanostructure investigation of the surfaces on a wide range of materials. In fact, SNOM combines the SPM technology to the optical microscopy and in this way provide a powerful tool to study nano-structures with very high spatial resolution. In this paper, a qualified overview of ...

متن کامل

Near-field optical microscopy of femtosecond-laser-reshaped silver nanoparticles in dielectric matrix

: Samples containing single silver nanoparticles have been irradiated by intense femtosecond laser pulses to gain a persistent transformation of their shape to ellipsoidal forms. Irradiated and non-irradiated regions of these samples have been analyzed by microscope spectrometry as well as near-field scanning optical microscopy (NSOM) with several wavelengths and different linear polarizations....

متن کامل

Imaging optical near-fields of nanostructures

We present a method for imaging the optical near-fields of nanostructures, which is based on the local ablation of a smooth silicon substrate by means of a single, femtosecond laser pulse. At those locations, where the field enhancement due to a nanostructure is large, substrate material is removed. The resulting topography, imaged by scanning electron or atomic force microscopy, thus reflects ...

متن کامل

Formation of fine near-field scanning optical microscopy tips. Part I. By static and dynamic chemical etching

Articles you may be interested in Formation of glass fiber tips for scanning near-field optical microscopy by sealed-and open-tube etching Rev. Formation of fine near-field scanning optical microscopy tips. Part II. By laser-heated pulling and bending Rev. Micromachined photoplastic probe for scanning near-field optical microscopy Rev. High throughput aperture near-field scanning optical micros...

متن کامل

Near-field optical photomask repair with a femtosecond laser.

We present a high-resolution near-field optical tool designed for repair of opaque defects in binary photomasks. Both instrument design and near-field imaging and patterning results will be presented. Designed for ablative processing of thin metal films, the MR-100 incorporates an industrial amplified femtosecond laser, third harmonic generator and built-in autocorrelator. The ultrashort durati...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of microscopy

دوره 194 Pt 2-3  شماره 

صفحات  -

تاریخ انتشار 1999