Membranes of Polyvinylidene Fluoride and PVDF Nanocomposites with Carbon Nanotubes via Immersion Precipitation
نویسنده
چکیده
Microporous polyvinylidene fluoride (PVDF) and PVDF nanocomposite membranes were prepared via an isothermal immersion precipitation method using two different antisolvents (ethanol and water). The structure and morphology of the resulting membranes were investigated by wide angle X-ray diffraction (WAXD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC). The effects of the type of the antisolvent and the presence of multiwalled carbon nanotubes (MWNTs) on membrane morphology and the crystal structure developed within the membranes were studied. The crystallization of the PVDF upon immersion precipitation occurred predominantly in the α-phase when water is used as the antisolvent or in the absence of the carbon nanotubes. On the other hand, β-phase crystallization of the PVDF was promoted upon the use of ethanol as the antisolvent in conjunction with the incorporation of the MWNTs. The morphology and the total crystallinity of the PVDF membranes were also affected by the incorporation of the MWNTs and the antisolvent used, suggesting that the microstructure and the ultimate properties of the PVDF membranes can be engineered upon the judicious selection of crystallization conditions and the use of carbon nanotubes.
منابع مشابه
Poly (Vinylidene Fluride) Membrane Preparation and Characterization: Effects of Mixed Solvents and PEG Molecular Weight
In this study, polyvinylidene fluoride (PVDF) ultrafiltration membranes were prepared via immersion precipitation method using a mixture of two solvents triethyl phosphate (TEP) and dimethylacetamide (DMAc), which had different affinities with the nonsolvent (water). Properties of the prepared membranes were characterized using scanning electron microscope (SEM) and contact angle and membrane p...
متن کاملInorganic nanotubes reinforced polyvinylidene fluoride composites as low-cost electromagnetic interference shielding materials
Novel polymer nanocomposites comprising of MnO2 nanotubes (MNTs), functionalized multiwalled carbon nanotubes (f-MWCNTs), and polyvinylidene fluoride (PVDF) were synthesized. Homogeneous distribution of f-MWCNTs and MNTs in PVDF matrix were confirmed by field emission scanning electron microscopy. Electrical conductivity measurements were performed on these polymer composites using four probe t...
متن کاملPolyvinylidene Fluoride Alters Inflammatory Responses by Activation-induced Cell Death in Macrophages
Carbon nanotubes (CNTs) are nanomaterials that have been employed in generating diverse materials. We previously reported that CNTs induce cell death in macrophages, possibly via asbestosis. Therefore, we generated CNT-attached polyvinylidene fluoride (PVDF), which is an established polymer in membrane technology, and then examined whether CNT-attached PVDF is immunologically safe for medical p...
متن کاملIsotherm Studies for Performance Evaluation of Functionalized Carbon Nanotubes (CNT) Based Polymer Composite Nanofiltration Membranes for Desalination
Composite Nanofiltration membranes were fabricated by incorporating Carbon Nanotubes (CNT) and Polyvinylidene Fluoride (PVDF) membranes. A suspension was prepared by dispersing CNT (30 minutes of sonication) in Dimethyl Sulfoxide (DMSO) solvent for 0.5 mg/ml. This suspension after vacuum filtration dispersed over PVDF membrane of pore size 0.22μm. Excess DMSO was removed by washing using Ethano...
متن کامل