Avalanche Boron Fusion by Laser Picosecond Block Ignition with Magnetic Trapping for Clean and Economic Reactor

نویسندگان

  • H. Hora
  • G. Korn
  • N. Nissim
  • P. Lalousis
  • L. Giuffrida
  • D. Margarone
  • A. Picciotto
چکیده

Measured highly elevated gains of proton-boron (HB11) fusion [1] confirmed the exceptional avalanche reaction process [2][3] for combination the non-thermal block ignition using ultrahigh intensity laser pulses of picoseconds duration. The ultrahigh acceleration above 10 20 cm/s 2 for plasma blocks was theoretically and numerically predicted since 1978 [4] and in measured [5] exact agreement [6] when the dominating force was overcoming thermal processes. This is based on Maxwell’s stress tensor by the dielectric properties of plasma leading to the nonlinear (ponderomotive) force fNL resulting in ultrafast expanding plasma blocks by a dielectric explosion. Combining this with measured ultrahigh magnetic fields and the avalanche process opens an option for an environmentally absolute clean and economic boron fusion power reactor. This is supported also by other experiments with very high HB11 reactions under different conditions [7].

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Energy Gain of Magnetized Cylindrical D-T Targets in Fast Ignition Fusion

In recent years, many different plans have been considered to use the nuclear energy gained from inertial confinement fusion (ICF) as attempts to obtain high energy efficiencies. In conventional ICF methods, a small amount (about mg) of the deuterium–tritium compound is confined in a small spherical chamber of a few millimeters in radius and compressed by laser or heavy ion beams with powers in...

متن کامل

Energy Gain of Magnetized Cylindrical D-T Targets in Fast Ignition Fusion

In recent years, many different plans have been considered to use the nuclear energy gained from inertial confinement fusion (ICF) as attempts to obtain high energy efficiencies. In conventional ICF methods, a small amount (about mg) of the deuterium–tritium compound is confined in a small spherical chamber of a few millimeters in radius and compressed by laser or heavy ion beams with powers in...

متن کامل

محاسبه بهره همجوشی اشتعال سریع با حضور میدان مغناطیسی توسط الکترون‌های نسبیتی و باریکه‌های پروتون

Fast ignition is a new method for inertial confinement fusion (ICF) in which the compression and ignition steps are separated. In the first stage, fuel is compressed by laser or ion beams. In the second phase, relativistic electrons are generated by pettawat laser in the fuel. Also, in the second phase 5-35 MeV protons can be generated in the fuel. Electrons or protons can penetrate in to the u...

متن کامل

Contributions on Laser Driven Inertial Confinement Fusion

The following modified preprint of a chapter in the forthcoming book by Guillermo Velarde and Natividad Carpintero Santamaria Inertial Confinement Nuclear Fusion: A Historical Approach by its Pioneers with personal comments is presented here as an example about the long years difficult developments towards the aim for producing unlimited, safe and clean nuclear energy in the same way as it is t...

متن کامل

Light for controlled fusion energy: A perspective on laser-driven inertial fusion

The status of laser-driven inertial confinement fusion research is briefly reviewed. The recent major achievement of fusion energy release exceeding the energy delivered by the laser to the fuel (Hurricane O. et al., Nature, 506 (2014) 343), and the efforts towards ignition demonstration using indirect-drive are discussed. Physics model reliability is addressed. The potentials of alternative sc...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016