“Solar and Thermal Energy Harvesting Textile Composites
نویسندگان
چکیده
Form Approved OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing this collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) Jun 2012 2. REPORT TYPE Final Report 3. DATES COVERED (From To) 01/01/07 – 09/01/09 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER
منابع مشابه
Single-fiber-based hybridization of energy converters and storage units using graphene as electrodes.
Recently, there has been great interest in wearable and stretchable energy generation and storage devices utilizing nanotechnology for applications such as self-powering nanosystem that harvests its operating energy from the environment. [ 1 ] Solar, mechanical and thermal energy can be scavenged from the environment using devices that were fabricated using fl exible or stretchable substrates. ...
متن کاملPiezoelectric, solar and thermal energy harvesting for hybrid low-power generator systems with thin-film batteries
The harvesting of ambient energy to power small electronic components has received tremendous attention over the last decade. The research goal in this field is to enable self-powered electronic components for use particularly in wireless sensing and measurement applications. Thermal energy due to temperature gradients, solar energy and ambient vibrations constitute some of the major sources of...
متن کاملFlexible hybrid energy cell for simultaneously harvesting thermal, mechanical, and solar energies.
We report the first flexible hybrid energy cell that is capable of simultaneously or individually harvesting thermal, mechanical, and solar energies to power some electronic devices. For having both the pyroelectric and piezoelectric properties, a polarized poly(vinylidene fluoride) (PVDF) film-based nanogenerator (NG) was used to harvest thermal and mechanical energies. Using aligned ZnO nanow...
متن کاملSilicon Nanowires for Solar Thermal Energy Harvesting: an Experimental Evaluation on the Trade-off Effects of the Spectral Optical Properties
Silicon nanowire possesses great potential as the material for renewable energy harvesting and conversion. The significantly reduced spectral reflectivity of silicon nanowire to visible light makes it even more attractive in solar energy applications. However, the benefit of its use for solar thermal energy harvesting remains to be investigated and has so far not been clearly reported. The purp...
متن کاملOn Energy Harvesting Module for Scalable Cognitive Autonomous Nondestructive Sensing Network (SCANS) System for Bridge Health Monitoring
The SCANS is a structural health monitoring (SHM) system is being developed by Acellent Technologies to monitor steel bridges. The required voltage of the system is 14.4 V for active scanning, and the power consumption is approximately 8 W. The investigated energy harvesting from both solar and thermal sources to recharge the lithium-ion battery of the system. A solar panel and a Thermal Electr...
متن کامل