3P-3W UPQC with zig-zag transformer for 3P-4W Distribution System

Abstract: In this paper, a new topology is developed for a three-phase four-wire (3P4W) distribution system utilizing a zig-zag transformer along with three-phase threewire (3P3W) Unified Power Quality Conditioner (UPQC).In this proposed topology the neutral point of the star connected transformer, used for the connection of series active power filter (APF) of 3P3W UPQC, is utilized as a fourth wire for 3P4W distribution system. The zig-zag transformer is connected near the load to compensate the neutral current that may flow toward the neutral point of the series transformer of series APF. The series and shunt APF of 3P-3W UPQC are realized by readily available three-leg voltage source inverters (VSIs). For the mitigation of different power quality problems a control technique based on synchronous reference frame (SRF) theory is used for the control of UPQC. In this control scheme of UPQC, the current/voltage control is applied over the fundamental supply currents/voltages instead of fast changing APFs currents/voltages, there by reducing the computational delay and the required sensors. The performance of the proposed topology of UPQC is analyzed through simulations results using MATLAB software with its Simulink and Power System Block set toolboxes.