Three Dimensional Finite Element Modeling and Analysis of Different Subway Tunnels Stray Current Fields
نویسندگان
چکیده
Abstract: In order to analyze the distribution rules and influence of stray current on subway rectangulartunneland subway Shield tunnel, threedimensional models were built separately. By changing the values of carry-current, ansys was used toanalyzeunder different geological conditions.Simulations show that the potential attenuation is nonlinear from the subway tunnel to the surrounding underground.The potential of the same location of surrounding media is different with different carry-current.The amount of leakage stray current of rectangular tunnel is less than Shield tunnel under same geological condition and same carry-current. Each points stray current in situation of surrounding soil media subway tunnel shield can be analyzed by the three-dimensional finite element model, and provide the basis for the protection range of stray current and the protection at a specific location.
منابع مشابه
Effect of Surface Blasting on Subway Tunnels- A Parametric Study
During wars and crises, the underground tunnels are used as a safe space. Therefore, the stability and safety of them under a blast is of particular importance. In this paper, the Finite Difference Method has been used to study the influence of the change in geotechnical parameters and depth on surface blasting on subway tunnels. Results showed that increasing the internal friction angle, modul...
متن کاملFinite Element Method Analysis of Influence on Subway Tunnel Adjacent to Excavation by Excavation Construction
The interaction influence on subway tunnels adjacent to foundation excavation was produced by excavation construction, and it is great significance for the correct assessment of its size and influence on the safety of subway operation. Based on the foundation excavation project, some typical foundation excavation profiles are selected, the calculation and analysis on additional settlement and h...
متن کاملFinite Element Method Application in Analyzing Magnetic Fields of High Current Bus Duct
The goal of paper is to present the magnetic field calculations in high current bus ducts. Finiteelement method is used to do this. Bus ducts under study have figure such as circle area. Thecalculations will be using mathematical relations, meshed geometric shape and analyzing them.Geometric mean will help us to determine the value of magnetic field. COMSOL software is appliedfor simulation stu...
متن کاملMathematical Proof for the Minimized Stray Fields in Transformers Using Auxiliary Windings Based on State Equations for Evaluation of FEM Results
Stray magnetic field is one of the main issues in design of transformers, since it causes non-ideal behavior of transformers. One of the techniques is usually adopted to mitigate the unwanted stray magnetic field is the use of auxiliary windings creating a magnetic field opposite to the incident one giving rise to the reduction of the total magnetic fields. This paper presents a new mathematica...
متن کاملEvaluation of Ultimate Torsional Strength of Reinforcement Concrete Beams Using Finite Element Analysis and Artificial Neural Network
Due to lack of theory of elasticity, estimation of ultimate torsional strength of reinforcement concrete beams is a difficult task. Therefore, the finite element methods could be applied for determination of strength of concrete beams. Furthermore, for complicated, highly nonlinear and ambiguous status, artificial neural networks are appropriate tools for prediction of behavior of such states. ...
متن کامل