RFC 3738 WEBRC Building Block

نویسنده

  • V. Goyal
چکیده

This document specifies Wave and Equation Based Rate Control (WEBRC), which provides rate and congestion control for data delivery. WEBRC is specifically designed to support protocols using IP multicast. It provides multiple-rate, congestion-controlled delivery to receivers, i.e., different receivers joined to the same session may be receiving packets at different rates depending on the bandwidths of their individual connections to the sender and on competing traffic along these connections. WEBRC requires no feedback from receivers to the sender, i.e., it is a completely receiver-driven congestion control protocol. Thus, it is designed to scale to potentially massive numbers of receivers attached to a session from a single sender. Furthermore, because each individual receiver adjusts to the available bandwidth between the sender and that receiver, there is the potential to deliver data to each individual receiver at the fastest possible rate for that receiver, even in a highly heterogeneous network architecture, using a single sender. Luby & Goyal Experimental [Page 1] RFC 3738 WEBRC Building Block April 2004

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Wave and Equation Based Rate Control (WEBRC) Building Block

This document specifies Wave and Equation Based Rate Control (WEBRC), which provides rate and congestion control for data delivery. WEBRC is specifically designed to support protocols using IP multicast. It provides multiple-rate, congestion-controlled delivery to receivers, i.e., different receivers joined to the same session may be receiving packets at different rates depending on the bandwid...

متن کامل

Constant-Rate Server Output in WEBRC

With the initial design of WEBRC, as described in the -00 and -01 IETF RMT building block drafts [1, 2], the server output rate varies in time with period TSD (recommended to be 10 seconds). The variation is quite significant; when the recommended multiplicative decrease value P = 0.75 is used, it causes the average output rate to be at least 13.1% less than the peak rate. This document describ...

متن کامل

Asynchronous Layered Coding (ALC) Protocol Instantiation

This document describes the Asynchronous Layered Coding (ALC) protocol, a massively scalable reliable content delivery protocol. Asynchronous Layered Coding combines the Layered Coding Transport (LCT) building block, a multiple rate congestion control building block and the Forward Error Correction (FEC) building block to provide congestion controlled reliable asynchronous delivery of content t...

متن کامل

Layered Coding Transport (LCT) Building Block

The Layered Coding Transport (LCT) Building Block provides transport level support for reliable content delivery and stream delivery protocols. LCT is specifically designed to support protocols using IP multicast, but it also provides support to protocols that use unicast. LCT is compatible with congestion control that provides multiple rate delivery to receivers and is also compatible with cod...

متن کامل

Internet Engineering Task Force ( IETF ) M

This document describes the Asynchronous Layered Coding (ALC) protocol, a massively scalable reliable content delivery protocol. Asynchronous Layered Coding combines the Layered Coding Transport (LCT) building block, a multiple rate congestion control building block and the Forward Error Correction (FEC) building block to provide congestion controlled reliable asynchronous delivery of content t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004