A Proposal of Stress/strain Analytical Procedure of Textile Compositess with Stitch by M Method
نویسندگان
چکیده
As the stitched yarn with a knot has more complicated pattern, the coordinate system is also very intricate. Therefore, finite element modelling of textile composites is very difficult. The penetration of yarns may be occurred when the conventional software allies to determine the architecture of yarns. In addition, it is very important to make clear not only the stress state but also the damage occurrence in composites in order to estimate the reliability for structures.
منابع مشابه
Analytical and Numerical Investigation of FGM Pressure Vessel Reinforced by Laminated Composite Materials
In this research, the analytical and numerical investigation of a cylindrical shell made of functionally graded materials (FGMs) reinforced by laminated composite subjected to internal pressure is presented. Using the infinitesimal theory of elasticity, the analytical solution of stress and strain in vessels made of FGMs is studied first. It is assumed that the elasticity modulus follows a powe...
متن کاملResidual Stresses Measurement of a Quenched Cylinder using Slitting Method
Residual Stress measurement has gained interests among researchers for many years due to its great influence on the structural integrity. Slitting method is one of the destructive techniques that relies on the introduction of an increasing cut to a part containing residual stresses. Similar to all other mechanical strain relief techniques, slitting also suffers from its shortcomings during the ...
متن کاملEngineering Critical Assessments of Marine Pipelines with 3D Surface Cracks Considering Weld Mismatch
Offshore pipelines are usually constructed by the use of girth welds, while welds may naturally contain flaws. Currently, fracture assessment procedures such as BS 7910 are based on the stress-based methods and their responses for situations with large plastic strain is suspicious. DNV-OS-F101 with limited modifications proposes a strain-based procedure for such plastic loads. In this paper 3D ...
متن کاملNONLINEAR POST-BUCKLING ANALYSIS OF ISOTROPIC PLATES BY USING FINITE STRIP METHODS
ABSTRACT This paper presents the theoretical developments of two finite strip methods (i.e. semi-analytical and full-analytical) for the post-buckling analysis of isotropic plates. In the semi-analytical finite strip approach, all the displacements are postulated by the appropriate shape functions while in the development process of the full-analytical approach, the Von-Karman’s equilibrium equ...
متن کاملClosed-form analytical solution procedure for element design in D regions
This paper presents a novel procedure for solving the equations system of the rotating crack model used for reinforced concrete. It is implemented in the programme NonOPt where it is used to optimise the reinforcement design of D regions. The procedure is based on solving explicit closed-form relations without the need to incrementally increase the applied loads. The solution procedure is based...
متن کامل