Low Loss Tapered Polysilicon Core Fibers
نویسندگان
چکیده
We have fabricated small core polysilicon waveguides by tapering bulk, as-drawn silicon optical fibers. The taper process acts to improve the local crystallinity of the core, resulting in a significant reduction in the material loss. OCIS codes: (060.2280) Fiber design and fabrication; (060.2290) Fiber materials; (060.4370) Nonlinear optics, fibers; (060.6000) Semiconductor Materials.
منابع مشابه
Tapered polysilicon core fibers for nonlinear photonics.
We propose and demonstrate a novel approach to obtaining small-core polysilicon waveguides from the silicon fiber platform. The fibers were fabricated via a conventional drawing tower method and, subsequently, tapered down to achieve silicon core diameters of ∼1 μm, the smallest optical cores for this class of fiber to date. Characterization of the material properties have shown that the taper...
متن کاملMaterial properties of tapered crystalline silicon core fibers
Crystalline silicon optical fibers are emerging as a promising platform for a wide range of optoelectronic applications. Here we report a crystallographic study of the material properties within silicon fibers that have been post-processed via a tapering procedure to obtain small, few micron-sized core diameters. Our results reveal that the tapering process can improve the polysilicon quality o...
متن کاملSoliton propagation in tapered silicon core fibers.
Numerical simulations are used to investigate soliton-like propagation in tapered silicon core optical fibers. The simulations are based on a realistic tapered structure with nanoscale core dimensions and a decreasing anomalous dispersion profile to compensate for the effects of linear and nonlinear loss. An intensity misfit parameter is used to establish the optimum taper dimensions that prese...
متن کاملNumerical Analysis of Index-Guiding Photonic Crystal Fibers with Low Confinement Loss and Ultra-Flattened Dispersion by FDFD Method
In this article, perfectly matched layer (PML) for the boundary treatment and an efficient compact two dimensional finite-difference frequency-domain (2-D FDFD) method were combined to model photonic crystal fibers (PCF). For photonic crystal fibers, if we assume that the propagation constant along the propagation direction is fixed, three-dimensional hybrid guided modes can be calculated by us...
متن کاملThulium fiber laser lithotripsy using tapered fibers.
INTRODUCTION The Thulium fiber laser has recently been tested as a potential alternative to the Holmium:YAG laser for lithotripsy. This study explores use of a short taper for expanding the Thulium fiber laser beam at the distal tip of a small-core fiber. METHODS Thulium fiber laser radiation with a wavelength of 1,908 nm, 10 Hz pulse rate, 70 mJ pulse energy, and 1-millisecond pulse duration...
متن کامل