Optimization of the Ethanol Recycling Reflux Extraction Process for Saponins Using a Design Space Approach
نویسندگان
چکیده
A solvent recycling reflux extraction process for Panax notoginseng was optimized using a design space approach to improve the batch-to-batch consistency of the extract. Saponin yields, total saponin purity, and pigment yield were defined as the process critical quality attributes (CQAs). Ethanol content, extraction time, and the ratio of the recycling ethanol flow rate and initial solvent volume in the extraction tank (RES) were identified as the critical process parameters (CPPs) via quantitative risk assessment. Box-Behnken design experiments were performed. Quadratic models between CPPs and process CQAs were developed, with determination coefficients higher than 0.88. As the ethanol concentration decreases, saponin yields first increase and then decrease. A longer extraction time leads to higher yields of the ginsenosides Rb1 and Rd. The total saponin purity increases as the ethanol concentration increases. The pigment yield increases as the ethanol concentration decreases or extraction time increases. The design space was calculated using a Monte-Carlo simulation method with an acceptable probability of 0.90. Normal operation ranges to attain process CQA criteria with a probability of more than 0.914 are recommended as follows: ethanol content of 79-82%, extraction time of 6.1-7.1 h, and RES of 0.039-0.040 min-1. Most of the results of the verification experiments agreed well with the predictions. The verification experiment results showed that the selection of proper operating ethanol content, extraction time, and RES within the design space can ensure that the CQA criteria are met.
منابع مشابه
Optimization of antioxidant compounds extraction from almond shell by response surface method
Background and aim: Extraction of natural antioxidant compounds has recently attracted the attention of researchers. Almond is one of the native products of Iran, which annually during the process of production , large volumes of waste is achieved. The aim of this study is investigating the impact of two parameters (time and ethanol percentage) on the extraction of phenol and ...
متن کاملOptimization of antioxidant compounds extraction from almond shell by response surface method
Background and aim: Extraction of natural antioxidant compounds has recently attracted the attention of researchers. Almond is one of the native products of Iran, which annually during the process of production , large volumes of waste is achieved. The aim of this study is investigating the impact of two parameters (time and ethanol percentage) on the extraction of phenol and ...
متن کاملThe Effect of Different Additives and Medium on the Bioleaching of Molybdenite for Cu and Mo Extraction Using Mix Mesophilic Microorganism
Bioleaching processes for extraction of Cu and Mo from molybdenite cons. are more environmentally friendly and consume less energy than conventional technologies, yet less economically efficient. One necessary step towards arriving at a cost-effective bioleaching process is using appropriate methodology to optimize pertinent factors in such processes. To this end, the present study employed Res...
متن کاملProcess optimization for ethanol production from very high gravity (VHG) finger millet medium using response surface methodology
The Box-Wilson central composite design (CCD) based on response surface methodology (RSM) was used for ethanol fermentation using very high gravity (VHG) finger millet hydrolysate. Optimized process variables were namely, concentrations of yeast extract, magnesium sulphate and pH of the medium. High gravity mashes (>300 g dissolved solids per liter) were prepared by a thermo-stable α-amylase, f...
متن کاملCoal Recycling from Tailings using Flotation with 2-Level Experimental Design Techniques
In this study, the possibility of producing coal with less than 11% ash from tailings of flotation process was investigated. The effect of six flotation parameters: collector type, collector consumption, frother type, frother consumption, pulp density and mixing rate were studied on a sample from a tailing dam. A software based experimental design approach (DX7) was applied to determine and mod...
متن کامل