Size limits the formation of liquid jets during bubble bursting
نویسندگان
چکیده
A bubble reaching an air-liquid interface usually bursts and forms a liquid jet. Jetting is relevant to climate and health as it is a source of aerosol droplets from breaking waves. Jetting has been observed for large bubbles with radii of R≫100 μm. However, few studies have been devoted to small bubbles (R<100 μm) despite the entrainment of a large number of such bubbles in sea water. Here we show that jet formation is inhibited by bubble size; a jet is not formed during bursting for bubbles smaller than a critical size. Using ultrafast X-ray and optical imaging methods, we build a phase diagram for jetting and the absence of jetting. Our results demonstrate that jetting in bubble bursting is analogous to pinching-off in liquid coalescence. The coalescence mechanism for bubble bursting may be useful in preventing jet formation in industry and improving climate models concerning aerosol production.
منابع مشابه
Identification the Periods of Formation and Bursting of Speculative Bubbles in Iranian Stock Market Using Quantitative Models
The purpose of this study is to investigate and identify the periods of formation and bursting of speculative bubbles in Iran's capital market by creating a state space model and two-mode switching regime (mode 1 is bubble growth and burst stage and mode 2 is the time of bubble loss) during the period from April 2011 to March 2018. The Oxmetrics 7 software is used to investigate the existence o...
متن کاملExperimental investigation of bubble growth and detachment in stagnant liquid column using image – based analysis
An experimental study has been carried out to characterize bubble formation, growth, and detachment mechanisms in a stagnant liquid column. Both bubble frequency and bubble detachment size were measured in different gas flow rates, injector diameters and orientations, submergence height, and liquid properties. Experiments were performed for air injection flow rate ranges between 200 mlph and 12...
متن کاملTime-resolved dynamics of laser-induced micro-jets from thin liquid films
Laser-induced forward transfer (LIFT) is a high-resolution direct-write technique, which can print a wide range of liquid materials without a nozzle. In this process, a pulsed laser initiates the expulsion of a highvelocity micro-jet of fluid from a thin donor film. LIFT involves a novel regime for impulsively driven free-surface jetting in that viscous forces developed in the thin film become ...
متن کاملNanoemulsions obtained via bubble-bursting at a compound interface
Bursting of bubbles at an air/liquid interface is a familiar occurrence relevant to foam stability, cell cultures in bioreactors and ocean–atmosphere mass transfer. In the latter case, bubble-bursting leads to the dispersal of sea-water aerosols in the surrounding air. Here we show that bubbles bursting at a compound air/oil/water-with-surfactant interface can disperse submicrometre oil droplet...
متن کاملA method for detecting bubbles in two-phase gas-liquid flow
Detecting bubble in two-phase flow has been a basic issue in two-phase flow systems. A new method for measuring the frequency of bubble formation is presented in this paper. For this purpose, an electronic device was designed and constructed which works based on a change in intensity of laser beam. For this purpose, continues light beam is embedded just above the needle, which is received by a ...
متن کامل