DEVELOPMENT OF CVD MULLITE COATINGS FOR SiC FIBERS
نویسندگان
چکیده
1.0 Introduction 2.0 Experimental details 2.1 CVD process 2.2 Oxidation Testing 2.3 Cyclic Oxidation Testing 2.4 Corrosion Testing 2.5 Tensile Testing 3.0 Results and discussion 3.1 3.2 3.3 3.4 3.5 3.6 Effect of system parameters 3.1.1 System pressure 3.1.2 Input gas velocity 3.1.3 A1/Si molar ratio Structure of mullite coating Oxidation Testing Cyclic Oxidation Hot Corrosion Tensile Strength 4.0 Conclusions 5.0 Acknowledgements 6.0 References Distribution lists 1 2 4 4 4 5 5 5 6 7 7 8 9 10 70 12 12 14 14 15 15
منابع مشابه
Nucleation mechanisms in chemically vapor-deposited mullite coatings on SiC
Dense, uniform, and adherent chemically vapor-deposited mullite coatings were deposited on SiC substrates using the AlCl3–SiCl4–H2–CO2 system. Typical coating morphology consisted of a thin interfacial layer of g–Al2O3 nanocrystallites embedded within a vitreous SiO2-based matrix. When a critical Al/Si ratio of 3.2 ± 0.29 was reached within this nanocrystalline layer, mullite crystals nucleated...
متن کاملPlasma spray deposition of tri-layer environmental barrier coatings
n air plasma spray process has been used to deposit tri-layer environmental barrier coatings consisting of a silicon bond coat, a mullite interiffusion barrier, and a Yb2SiO5 top coat on SiC substrates. Solidified droplets in as-deposited Yb2SiO5 and mullite layers were discovered to be epleted in silicon. This led to the formation of an Yb2SiO5 + Yb2O3 two-phase top coat and 2:1 mullite (2Al2O...
متن کاملStructure, composition, and defect control during plasma spray deposition of ytterbium silicate coatings
Environmental barrier coatings (EBCs) are needed to protect SiC structures exposed to high temperatures in water vapor-rich environments. Recent studies of a tri-layer EBC system consisting of a silicon layer attached to the SiC, a mullite diffusion barrier and a lowsteam volatility ytterbium silicate topcoat have shown some promise for use at temperatures up to 1316 C. However, the performance...
متن کاملDensification and mechanical properties of mullite–SiC nanocomposites synthesized through sol–gel coated precursors
Mullite–SiC nanocomposites are synthesized by introducing surface modified sol–gel mullite coated SiC particles in the matrix and densification and associated microstructural features of such precursor are reported. Nanosize SiC (average size 180 nm) surface was first provided with a mullite precursor coating which was characterized by the X-ray analysis and TEM. An average coating thickness of...
متن کاملRheological behaviour of submicron mullite–carbon nanofiber suspensions for Atmospheric Plasma Spraying coatings
ullite is widely used as a structural material for applications like thermal and environmental barriers coatings. For some of these applications, hermal spray is a suitable technique due to its fast production time and versatility. This makes mullite a very interesting coating material for thermal pray industry. In the present work, the viability to produce coatings by thermal spray using mulli...
متن کامل